User's Manual

Maintenance and Adjustment
154
Rebound Damping Adjustment
1. Rebound damping adjuster
The rebound damping adjuster is located
at the bottom of the rear suspension
unit and is accessible from left hand side
of the motorcycle.
To adjust the rebound damping setting,
rotate the slotted adjuster clockwise to
increase, and anticlockwise to decrease.
Note:
• The setting is measured as the
number of adjuster clicks
anticlockwise from the fully
clockwise (closed) position.
Rear Suspension Setting Chart
The standard suspension settings
provide a comfortable ride and good
handling characteristics for general, solo
riding. The following chart shows
suggested settings for the rear
suspension.
An increase in spring pre-load requires
firmer damping, a reduction in spring
pre-load requires softer damping.
The damping must be adjusted to the
road conditions and the spring pre-load.
Note:
• This chart is only a guide. Setting
requirements may vary for rider
weight and personal preferences.
See the following pages for
information regarding suspension
adjustment.
civm
1
Loading Spring
Pre-Load¹
Rebound
Damping²
Solo (Normal) 17 8
Solo (Comfort) 17 12
Solo (Sport) 17 4
Solo (Off-Road) 17 4
Solo (With
Loaded
Luggage
Items)
6 5
Rider and
Passenger
0 4
Rider and
Passenger
(with Loaded
Luggage
Items)
0 3
¹ Number of turns anticlockwise from
the fully clockwise (closed) position.
² Number of clicks anticlockwise from
the fully clockwise (closed) position
noting that the first stop (click) is
counted as 1.