User's Manual
Maintenance and Adjustment
160
Warning
When replacement tyres are required,
consult  your  authorised  Triumph
dealer  who  will  arrange  for  the  tyres
to  be  selected,  in  a  correct
combination,  from  the  approved  list
and  fitted  according  to  the  tyre
manufacturer's instructions.
When  tyres  are  replaced,  allow  time
for  the  tyres  to  seat  to  the  rim
(approximately  24 hours).  During  this
seating  period,  ride  cautiously  as  an
incorrectly  seated  tyre  could  cause
instability,  loss  of  motorcycle  control
and an accident.
Initially, the new tyres will not produce
the  same  handling  characteristics  as
the  worn  tyres  and  the  rider  must
allow  adequate  riding  distance
(approximately  100 miles)  to  become
accustomed  to  the  new  handling
characteristics.
24 hours  after  fitting,  the  tyre
pressures  must  be  checked  and
adjusted,  and  the  tyres  examined  for
correct  seating.  Rectification  must  be
carried out as necessary.
The  same  checks  and  adjustments
must  also  be  carried  out  when
100 miles  have  been  travelled  after
fitting.
Use  of  a  motorcycle  with  incorrectly
seated tyres, incorrectly adjusted tyre
pressures, or when not accustomed to
its  handling  characteristics  may  lead
to  loss  of  motorcycle  control  and  an
accident.
Warning
Tyres that have been used on a rolling
road  dynamometer  may  become
damaged.  In  some  cases,  the  damage
may  not  be  visible  on  the  external
surface of the tyre.
Tyres must be replaced after such use
as  continued  use  of  a  damaged  tyre
may  lead  to  instability,  loss  of
motorcycle control and an accident.
Warning
Use  of  a  motorcycle  with  incorrectly
seated tyres, incorrectly adjusted tyre
pressures, or when not accustomed to
its  handling  characteristics  may  lead
to  loss  of  motorcycle  control  and  an
accident.
Warning
Accurate  wheel  balance  is  necessary
for  safe,  stable  handling  of  the
motorcycle. Do not remove or change
any  wheel  balance  weights.  Incorrect
wheel  balance  may  cause  instability
leading  to  loss  of  motorcycle  control
and an accident.
When  wheel  balancing  is  required,
such  as  after  tyre  replacement,  see
your authorised Triumph dealer.
Only  use  self-adhesive  weights.  Clip-
on  weights  may  damage  the  wheel
and  tyre  resulting  in  tyre  deflation,
loss  of  motorcycle  control  and  an
accident.










