User Manual

24
TRUNK
Trunk
OPENING THE TRUNK
To open the trunk, either press the trunk
release button on the key fob for three
seconds or press the trunk release button
on the left-hand dashboard closing panel.
To close, firmly apply downward pressure
to the center of the trunk lid.
Note: The trunk release button is disabled if
Valet Mode is enabled or the vehicle is in a
propulsion mode other than Park [P].
MANUALLY OPENING THE
TRUNK
To manually open the trunk, remove the
rear seat back on the driver side. A pull ring
is located between the rear door and the
rear head rest, just below the seatbelt
retractor.
TRUNK INTERIOR RELEASE
HANDLE
Your Revero is equipped with a mechanical
trunk release handle that provides a means
of escape in the event that a person
becomes locked inside the trunk. Adults are
advised to familiarize themselves with the
operation and location of the release
handle.
A T-shaped handle is located inside the
trunk above the latch at the center of the
trunk lid. This handle is made using a
luminescent material that glows for hours
after a brief exposure to ambient light.
To open the trunk from the inside, pull the
T-shaped handle and push up on the trunk
lid.
K13004