INSTALLATION/OPERATION 300 Series Flat Panel LCD Monitors C2926M-C (5/07)
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Description The 300 Series LCD monitors, designed specifically for the security industry, provide a high resolution display of computer signals and/or composite video. These 15-, 17-, and 19-inch monitors use a color, thin film transfer (TFT) active matrix LCD panel that automatically adapts to the appropriate input resolution. The 300 Series provides looping composite (BNC) and S-Video inputs.
Installation The monitor can be placed on any flat surface (desk or table), or it can be rack mounted or wall mounted. NOTE: Only use a recommended rack mount kit such as the PMCL-RM15, PMCL-RM17, PMCL-RM19, or PMCL-WM. To rack-mount the monitor, follow the instructions supplied with the rack mount kit, or wall mount kit. DESKTOP STAND You can manually adjust the 300 Series monitor to the viewing angle you want by repositioning the foot stand on the back of the monitor.
VIDEO AND POWER CONNECTIONS Refer to Figure 2 for video, audio, and power connections. 1. Connect the video cable (refer to Table A for video coaxial requirements.) a. Connect the video cable to one of the following, depending on the input source. • • • b. If composite, connect to the BNC video input labeled VIDEO 1 IN on the back panel of the monitor.
PMCL300 DVR CAMERA S-VIDEO IN OUT R L AUDIO SOURCE AUDIO IN VIDEO 1 DVR IN OUT CAMERA Figure 3. Looping Operation: One Monitor with External Video Equipment PMCL300 S-VIDEO OUT L DVR S-VIDEO IN R OUT L AUDIO IN VIDEO 1 OUT PMCL300 S-VIDEO IN R OUT OUT L AUDIO IN VIDEO 1 IN PMCL300 IN R AUDIO SOURCE AUDIO IN VIDEO 1 IN OUT IN CAMERA Figure 4.
Operation FRONT PANEL CONTROLS CH Figure 5. Front Panel Controls 1. CH (menu): Selects the input signal. 2. !: Decreases the value of a selected menu item, and decreases the volume. 3. ": Increases the value of a selected menu item, and increases the volume. 4. #: Moves the highlighter downward through a menu. 5. $: Moves the highlighter upward through a menu. 6. %: Accesses pop-up menus and is also used to select a highlighted menu item. 7.
OSD CONTROL MENUS Unless otherwise noted, the menus are the same for the PMCL315, PMCL317, and PMCL319. To use the menus: 1. Press the menu (CH) button to access the Main menu. (To access the Main menu, you must press the menu [CH] button until you enter VGA mode.) 2. Use the up and down arrow buttons to highlight a selection. 3. Press the menu (CH) button to select an item. 4. Use the left and right arrow buttons to adjust the setting on a selected item. MAIN MENU MAIN MENU VGA IN: 1280x1024 H.SYNC: -48.
DISPLAY ADJUST MENU DISPLAY ADJUST V-POSITION H-POSITION PITCH PHASE SHARPNESS AUTO TUNING RECALL RETURN 050 080 050 058 000 Figure 7. Display Adjust Menu Display Adjust Menu Field Definitions V-POSITION: Moves the screen up or down. H-POSITION: Moves the screen image left or right. PITCH: Adjusts image distortion appearing as vertical bars or noise on the screen. PHASE: Adjusts image distortion appearing as horizontal noise on the screen. SHARPNESS: Adjusts the picture softer or sharper.
COLOR TEMPERATURE MENU COLOR TEMPERATURE 9300K 7500K 6500K USER PRESET RECALL RETURN USER PRESET RED 050 GREEN 050 BLUE 050 RETURN Figure 8. Color Temperature Menu Color Temperature Menu Field Definitions 9300K, 7500K, 6500K: These settings change the color temperature to suit your preference. Low color temperature implies warmer (more yellow/red) light while high color temperature implies a colder (more blue) light. The unit of measurement is Kelvin (K). USER PRESET: Accesses the USER PRESET menu.
AUDIO CONTROL MENU AUDIO CONTROL MUTE VOLUME RECALL RETURN OFF 050 Figure 10. Audio Control Menu Audio Control Menu Field Definitions MUTE: Toggles muting on or off. Use the arrow keys to highlight, and then press the menu button. VOLUME: Controls the volume. Highlight and use the left or right arrow keys to increase or decrease the volume. Press the menu button when finished. RECALL: Resets audio controls to the last customized set point. RETURN: Takes you back to the Main menu.
VIDEO ADJUST MENU VIDEO ADJUST CONTRAST BRIGHTNESS COLOR SHARPNESS HUE INPUT TYPE LANGUAGE OSD ADJUST AUDIO CONTROL INPUT SELECT RECALL EXIT 053 050 050 000 050 4:3 Figure 11. Video Adjust Menu The Video Adjust menu is accessed by pressing the menu button on the monitor’s front panel until you enter S-Video mode or Video In or Out mode. Video Adjust Menu Field Definitions CONTRAST: Adjusts foreground white level of the video screen image.
Maintenance If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and cable runs. WARNING: To reduce the risk of electrical shock, do not remove the cover or back of the monitor. No user-serviceable parts are inside. Refer servicing to qualified personnel, or contact the Pelco Customer Service Department for assistance, 1-800-289-9100.
Specifications MODELS PMCL315 PMCL317 PMCL319 15-inch (381 mm) active TFT LCD monitor, multimode 17-inch (432 mm) active TFT LCD monitor, multimode 19-inch (483 mm) active TFT LCD monitor, multimode GENERAL LCD Panel Pixel Array PMCL315 PMCL317, PMCL319 Panel Aspect Ratio PMCL315 PMCL317, PMCL319 Viewing Area PMCL315 PMCL317 PMCL319 Pixel Pitch PMCL315 PMCL317 PMCL319 Brightness PMCL315 PMCL317 PMCL319 Contrast Ratio Backlight Type Panel Lamp Life Viewing Angle (H/V) PMCL315 PMCL317 PMCL319 Tilt Display C
PHYSICAL Dimensions PMCL315 PMCL317 PMCL319 Unit Weight PMCL315 PMCL317 PMCL319 Shipping Weight PMCL315 PMCL317 PMCL319 2.9" D x 13.7" W x 11.8" H (7.4 x 34.7 x 29.9 cm) 3.2" D x 15.0" W x 13.4" H (8.0 x 38.1 x 34.1 cm) 3.3" D x 16.6" W x 14.7" H (8.3 x 42.1 x 37.4 cm) 9.6 lb (4.4 kg) 12.4 lb (5.6 kg) 14.5 lb (6.6 kg) 13.0 lb (5.9 kg) 16.0 lb (7.3 kg) 19.0 lb (8.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on fiber optic products and TW3000 Series unshielded twisted pair transmission products. • Three years on Spectra® IV products. • Three years on Genex® Series products (multiplexers, server, and keyboard).
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.
