INSTALLATION/OPERATION C10-UM Universal Indoor Camera Mount C2237M (1/08)
Contents Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . .
Description The C10-UM is a universal camera mount kit that includes all the components for wall, ceiling or T-rail clip installations, for most box type cameras with 1/4 x 20-inch mounting holes. The kit supports cameras weighing up to 7 pounds (3.18 kg). The ball socket of the kit allows for 360 degree pan adjustment and 90 degree tilt adjustment. The mounting plate is designed to attach a standard 2 x 4-inch (5.08 x 10.
PACKAGE CONTENTS The following diagram shows the box contents. When installing the C10-UM, refer to this diagram. SHIPPING BOX 1.75 IN. (4.45 CM) TUBE 1 EA. MOUNTING PLATE T-BAR CLIP C2237M (1/08) 3.25 IN. (8.25 CM) TUBE 1 EA.
Installation CEILING MOUNT Figure 1. Ceiling Mount Installation To install the mount to a ceiling refer to Figure 1, and then complete the following steps: 1. Pull the wire and cable for the camera through the mounting plate, and then attach the mounting plate to the mounting surface (hardware not supplied). 2. Attach the ball socket to the threaded stud on the mounting plate. 3.
WALL MOUNT COMPACT CAMERA MODELS Figure 2. Wall Mount Installation for Compact Camera Models To install the mount to a wall refer to Figure 2, and then complete the following steps: 1. Pull the wire and cable for the camera through the mounting plate, and then attach the mounting plate to the mounting surface (hardware not supplied). 2. Attach the 1.75-inch (4.45 cm) tube to the threaded stud on the mounting plate. 3. Attach the ball socket to the threaded stud on the end of the tube. 4.
FULL-SIZE CAMERA MODELS Figure 3. Wall Mount Installation for Full-Size Camera Models To install the mount to a wall refer to Figure 3, and then complete the following steps: 1. Pull the wire and cable for the camera through the mounting plate, and then attach the mounting plate to the mounting surface (hardware not supplied). 2. Attach the 3.25-inch (8.25 cm) tube to the threaded stud on the mounting plate. 3. Attach the ball socket to the threaded stud on the end of the tube. 4.
T-RAIL MOUNT Figure 4. T-Rail Mount Installation To install the mount to a T-rail refer to Figure 4, and then complete the following steps: 1. Twist the T-rail clip onto the T-bar. 2. Attach the ball socket to the threaded stud on the T-rail clip. 3. Attach the camera to the 1/4-20 threaded stud on the ball socket. 4. Use an 1/8-inch Allen wrench (not provided) to loosen the set screw on the ball socket to position the camera, and then retighten the set screw. 5.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC. This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • • • • • • • • • • • • • • Five years on fiber optic products and TW3000 Series unshielded twisted pair (UTP) transmission products. Three years on Spectra® IV products. Three years on Genex® Series products (multiplexers, server, and keyboard).
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.
