® SD5 Series Spectra® Dome Maintenance/ Service Manual C1455SM-C (5/00) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.
DESCRIPTION This maintenance/service manual consists of exploded assembly diagrams and parts lists. Use this manual when ordering replacement parts for Spectra® domes in the SD5 Series. BACK BOX ELECTRONIC ASSEMBLY REMOVAL To remove the back box electronic assembly: 1. Turn off power. 2. Open the interconnect door and disconnect all wiring to the back box. 3. Use an 11/32 socket driver to remove the three 8-32 washers and nuts that hold the electronic assembly to the back box.
EXPLODED ASSEMBLY DIAGRAMS 3 4 12 5 11 6 2 10 9 7 1 8 Figure 1. Exploded Assembly Diagram–Back Box, In-Ceiling and Pendant Models Table A. Exploded Assembly Parts List–Back Box, In-Ceiling and Pendant Models Item 1 2 3 4 5 6 7 8 9 10 11 12 NS NS NS Qty 2 1 1 1 2 3 2 3 3 1 1 1 1 1 1 3 3 Description Trim ring snap cap In-ceiling back box Safety chain bracket Conduit fitting Spring clip Push nut bolt retainer, #8 Screw, 8-32 x 3.50-inch, Phillips, pan head, Screw, 8-32 x .
1 2 12 3 11 4 10 5 9 6 8 7 Figure 2. Exploded Assembly Diagram–Back Box Electronic Assembly Table B. Exploded Assembly Parts List–Back Box Electronic Assembly 4 Item 1 2 3 4 5 6 7 8 9 10 Qty 1 3 3 5 1 1 2 10 1 1 11 12 1 1 Description Spectra interconnect back box receptacle Flat washer, #8 Nut, 8-32 Spacer, .25-inch O.D. x .187-inch Interconnect door 22-position connector Screw, 4-40 x .3125-inch, Phillips, pan head Internal tooth lock washer, #4 Thumbscrew, 8-32 x .
4 3 1 2 Figure 3. Exploded Assembly Diagram–Lower Dome, In-Ceiling Models Table C.
8 6 3 1 4 7 2 5 Figure 4. Exploded Assembly Diagram–Lower Dome, Pendant Models Table D.
1 Table E. Exploded Assembly Parts List– Heater Segment in Back Box 4 3 6 2 5 Figure 5. Exploded Assembly Diagram– Heater Segment in Back Box Item Qty Description Part Number 1 2 3 4 5 2 2 2 6 4 7061007 7064035COMP HT01-0321-0202 ZH4-40NUTSH ZH4-40X.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. • Three years on Genex ® Series products (multiplexers, server, and keyboard).
