Computer Monitor User Manual

6 Pelco Manual C1909M (4/01)
OPERATION
1. Turn the monitor ON. Wait 30 seconds for the picture tube to warm up and the power
LED indicator to light.
2. Select the video source (V1, V2, S-VHS) using the VIDEO selection button located on
the front panel of the monitor.
3. If required adjust the picture using the control knobs on the front panel.
FRONT PANEL ADJUSTMENTS
SHARP Adjust the control to obtain the clearest picture.
TINT Turn the control clockwise to increase the greenish tones in the picture.
Turn the control counterclockwise to increase the reddish tones in the pic-
ture.
COLOR Turn the control clockwise to increase the saturation level and counterclock-
wise to decrease the saturation level.
BRIGHT Turn the control clockwise to increase brightness and counterclockwise to
decrease brightness.
CONTRAST Proper adjustment will allow maximum gradations between the darkest and
lightest picture contrast. Turn the control clockwise to increase picture con-
trast and counterclockwise to decrease contrast.
VOLUME Turn the control clockwise to increase volume and counterclockwise to de-
crease volume.
Figure 4. Front Panel Controls
MAINTENANCE
If the quality of the picture is poor and cannot be improved by making adjustments on the
front control panel, inspect all system connections and cable runs.
To reduce the risk of electrical shock, do not remove the cover or the back. No user-
serviceable parts are inside. Refer servicing to qualified personnel, or contact the Pelco
Customer Service Department for assistance. Refer to the Warranty and Return Information
section.
SHARP TINT COLOR BRIGHT CONTRAST VOLUME
V1 V2 S-VHS
VIDEO
POWER
00596