User's Manual

C2904M-B (2/05) 37
CONFIGURATION PAGE FOR MPEG 1/-2 VIDEO ENCODER SETTINGS
Figure 27. Configuration Page for MPEG 1/-2 Video Encoder Settings
MPEG-2 encoder and live page settings make up the configuration page for MPEG 1/-2 video encoder settings. The following table
describes the configuration items.
Table B. Configuration Page for MPEG 1/-2 Video Encoder Settings
Configuration Default
Description
Item Setting
Camera Camera 1 Enter a camera name (30 alphanumeric characters maximum). (This name is not displayed except on this configura-
tion page. For future development.)
Preset 2MBPS MPEG-2 data transmissions can be configured to suit the local operating environment (for example, network
parameter low delay architecture, bandwidth, data structures). To help with this, several pre-programmed profiles with different features
MPEG-2 are provided. Select from the pull-down menu.
encoding
• 2 MBPS low delay/3,5 MBPS low delay/5 MBPS low delay
2 or 3.5 or 5 Mbps transmission rate with minimum delay on image refresh
• 2 MBPS high quality/3,5 MBPS high quality/5 MBPS high quality
2 or 3.5 or 5 Mbps transmission rate with highest picture quality
• 2 MBPS with audio/3,5 MBPS with audio
2 or 3.5 Mbps transmission rate with associated audio transmission
Video on live MPEG2 Select MPEG2 from the pull-down menu.
page