Camclosure 2 Is20-Chv10s Surveillance Camera Manual

20 C3472M-C (9/10)
3. Rotate the tilting table (±75-degree range) to adjust the tilting position of the camera (refer to Figure 12).
NOTES:
• This lens can also be rotated in the reverse direction, but the image azimuth is reversed. In such a
case, turn the panning table to the 180-degree side to correct the azimuth image.
• When used at an angle that is close to horizontal, the shadow of the dome cover may be projected.
Figure 12. Adjusting the Tilting Position (Day/Night Model Shown)
4. Tighten both the panning table lock screw and the tilting lock screws on both sides after adjusting the tilt
position of the camera. The recommended tightening torque is 0.59 N
.
m (6 k
g f
.
cm).
5. Rotate the azimuth adjuster (±100-degree range) to adjust the azimuth angle of the image (refer to Figure 13).
Figure 13. Adjusting the Azimuth Angle (Color Model Shown)
ì
Tilting Lock Screw
ì
Indication
î
Azimuth Adjuster
75°75°
100°100°