I N S T A L L A T I O N HS2100 Ceiling Enclosure C1465M-A (9/06)
Important Safety Instructions 1. Installation and servicing should be done only by qualified service personnel and conform to all Local codes. 2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture. 3. Only use replacement parts recommended by Pelco. 4.
Installation The following items are supplied: 1 Enclosure 1 Parts bag (Parts may be used to attach the camera to the mount.) 1 Hex bolt, 1/4-20 x 1/2" 1 Split washer 1 Flat washer 1 Backup flanges to support the enclosure if adequate mounting support is not available or if enclosure is mounted in drop ceiling tiles 1 Pin-in-hex wrench to remove tamper-resistant screw Recommended Tools Pelco does not supply the basic tools needed for the installation process.
Table A. Video Coaxial Cable Wiring Distances Cable Type* Maximum Distance RG59/U 750 ft (229 m) RG6/U 1,000 ft (305 m) RG11/U 1,500 ft (457 m) *Cable requirements: 75 ohms All-copper center conductor All-copper braided shield with 95-percent braid coverage Table B. 24 VAC Wiring Distances The following are the recommended maximum distances for 24 VAC applications and are calculated with a 10 percent voltage drop. (Ten percent is generally the maximum allowable voltage drop for AC-powered devices.
Maintenance Regularly scheduled maintenance will prolong the operational life and appearance of the enclosure. Clean the outer surface of the enclosure with a nonabrasive cleaning cloth and antistatic cleaner. Clean the viewing window with a mild, nonabrasive soap and water to maintain picture clarity. Do not use kerosene or similar substances that may damage the surface.
Specifications GENERAL Environment Indoor only Operating Range 32° to 120°F (0° to 49°C) Weight 5.30 lb (2.41 kg) MECHANICAL Construction Upper section 5052-H32 aluminum Lower section 16 gauge steel Viewing window 0.25" (6.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. • Three years on Genex® Series products (multiplexers, server, and keyboard). If a warranty repair is required, the Dealer must contact Pelco at (800)þ289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information: 1. Model and serial number 2.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.
