Installation Manual

C2301M (3/18) 5
C11-UM MOUNT
1. Pull the wire and cable for the camera through the mounting plate and then attach the mounting plate to the mounting surface (hardware
not supplied).
Figure 7. Attach the C11-UM Mount to the Mounting Surface
2. Apply a drop of thread adhesive to the external threads of the Extension Tube that will be used. Discard the unused Extension Tube.
3. Screw the Extension Tube to the Ball Socket Assembly until hand tight.
Figure 8. Attach the Head of the C11-UM Mount
Figure 9. Rotate the Head of the C11-UM Mount