User's Manual

ManualsBrandsPelco ManualsBarcode ReaderPelco Data Interface C3611M

C3611M (12/07) 1

CONNECT THE EDI5000-AD2088 TO AN AD MATRIX SYSTEM

Figure 1. Connect the EDI5000 to the AD Matrix System

NOTE: The alarm and relay inputs on the data interface are reserved for

future use, and are not included in this table.

Table A. EDI5000 and AD2088 RS-232 Pin Assignments

Pin Assignment AD2088 Keyboard EDI5000 COM 1

RS-232 Data Rx+ PIN 5 PIN 1

Ground PIN 7 PIN 5

RS-232 Data Tx+ PIN 4 PIN 9

Pin Assignment AD Matrix EDI5000 COM 2

RS-232 Data Rx+ PIN 5 PIN 2

Ground PIN 7 PIN 6

RS-232 Data Tx+ PIN 4 PIN 10

910

AD MATRIX

CAMERA 1

CAMERA 2

MATRIX MONITOR

COM 1

COM 2

Rx+

Tx+

GND

Rx+

Tx+

EDI5000-AD2088

REVERSED

DATA CABLE

AD DUAL 8-PIN

TERMINAL BLOCK

9 VAC

REVERSED

DATA CABLE

AD2088 MATRIX KEYBOARD

C3611M (12/07)

EDI5000-AD2088 Data Interface

Quick Start Guide

Summary of content (4 pages)

PAGE 1
C3611M (12/07) EDI5000-AD2088 Data Interface Quick Start Guide CONNECT THE EDI5000-AD2088 TO AN AD MATRIX SYSTEM MATRIX MONITOR CAMERA 1 CAMERA 2 AD MATRIX AD2088 MATRIX KEYBOARD REVERSED DATA CABLE REVERSED DATA CABLE AD DUAL 8-PIN TERMINAL BLOCK 8 1 8 9 VAC 1 9 10 7 8 5 6 3 4 1 2 1 2 7 2 GND 7 2 6 3 5 4 6 3 4 COM 1 5 Tx+ Rx+ COM 2 Rx+ Tx+ GND EDI5000-AD2088 Figure 1. Connect the EDI5000 to the AD Matrix System z Table A.
PAGE 2
CONFIGURE THE EDI5000-AD2088 1. From the Endura® workstation (or from any other computer connected to the Endura network) open a Web browser window. The EDI5000 system configuration software is compatible with the following Web browsers: • Microsoft® Internet Explorer® version 6.0 or higher • Mozilla® Firefox® version 2.0 or higher 2. Type the IP address of the EDI5000 data interface unit in the Web browser address. The default IP address is 192.168.0.1. Figure 2. EDI5000 Default IP Address 3. Press Enter.
PAGE 3
OPERATE THE EDI5000-AD2088 When an operator is viewing live video from the matrix system, the keyboard commands and options are controlled by the matrix system, and they function as described in the matrix system documentation. When an operator is viewing either live video from an Endura system camera or recorded video, the keyboard commands and options are controlled by the EDI5000 data interface, and they function as described in this section.
PAGE 4
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.