User's Manual

18 C1606M (6/04)
RECONNECT THE DATA AND POWER CABLES
IMPORTANT: Data and power cable connectors fit together only one way. All connectors are keyed to
ensure that they are inserted in the proper orientation. Examine the drive, motherboard, and cable
connectors before installation so that connectors are properly aligned. Make sure connectors are seated
in the mating connectors securely, but do not force the connection. When installing drive power cables,
push the connectors straight in or out; do not rock connectors back and forth.
1. Connect the CD-RW drive to the system motherboard using the data cable that you removed earlier:
a. Connect the
gray connector of the data cable that came with your DX8000 to the CD-RW drive as illustrated in
Figure 16.
b. Connect the
black connector of the data cable to the newly installed hard drive. Refer to Figure 16.
c. Connect the
blue connector of the data cable to the primary ( blue ) IDE connector on the system motherboard.
Refer to Figure 16.