User's Manual

24 C2641M-B (4/08)
f. Press F10 and then select OK to save your changes and exit. The DX8100 will restart and prompt you by displaying “Press any key to
boot from CD.”
Figure 28. Selecting OK to Save Changes
NOTE: The prompt “Press any key to boot from CD/DVD” appears for only a few seconds; and if missed the unit will not boot from the
DX8100 Recovery DVD.
g. Press the Space bar. After the DVD finishes loading, one of the following will occur:
• If using Windows XP Embedded, the End User License Agreement (EULA) appears. Go to step h.
• If using Windows 2000, the DX8100 Recovery dialog box opens. Go to step i.
Figure 29. End User License Agreement Dialog Box