User's Manual

After a beep enter on the keypad:

A sharp beep confirms that you have deleted Alan’s code. Programming mode beep - every 4 seconds - resumes.

After a beep enter on the keypad:

A sharp beep confirms that you have deleted Alex’s code. Programming mode beep - every 4 seconds - resumes.

Note 1. You do not need to know the actual code itself which needs to be deleted, only the Slot Number in which it is

stored.

Note 2. Capacity is never reduced as a result of deleting codes. You can always add or change codes.

CHANGING THE MASTER CODE

Refer to page 11.

CHANGING RELAY/LOCK OUTPUT TIME

Refer to page 11.

Automatic Time-Out – whenever programming accessed via Master Code

System automatically reverts to normal mode approximately 20 seconds after the last

programming operation. A single longer sharp beep signals that the system has exited

from programming mode and returned to normal mode.