Brochure

PRODUCT SPECIFICATION
video management solutions
C4014 / NEW 9-16-14
International Standards
Organization Registered Firm;
ISO 9001 Quality System
Digital Sentry
®
DSSRV2 Network Video Recorder
H.264 CAPABILITY, FULLY SCALABLE HARDWARE/SOFTWARE SOLUTION
Product Features
• Increased data rate of up to 350 Mbps (RAID) or 300 Mbps (JBOD)
total throughput, allowing the server to support more users and play
back more cameras simultaneously than previous DSSRV models
• 4TB storage drives provide 33% more storage over DSSRV 3TB
models
at no additional cost; systems previously utilizing two or
more servers can now be built on a single server
• SSD system drive, with increased read-write speeds and no moving
parts,
increases
overall system responsiveness and reliability
• Supports up to 128 IP Camera Streams; up to 64 Analog Cameras*
• Records H.264, MJPEG, and MPEG-4 IP Streams
• Supports Pelco and Third-Party IP Cameras and Network Encoders
• Compatible with DS ControlPoint for Simultaneous Monitoring of All
DS Series
and DX Series Products in a Single Client Interface
• Network Health and Event Monitoring Support Through SNMP and
New Digital
Sentry
®
System Information (DSSI) Utility
• Compatible with the DS Archive Utility
• Recording Rate Configurable per Individual Camera
Optimized For Video Surveillance
The Digital Sentry
®
Network Video Recorder (DSSRV2 NVR) is
optimized by Pelco to deliver the essential hardware support for the
DS NVs video management software (VMS) without the extra cost or
risk of integrating hardware and software.
Boosted by the 4th Generation Intel
®
Xeon
™
processor and 8 GB of
RAM, DSSRV2 NVR provides an optimal combination of processing
power and reliability to meet the demands of HD video recording and
playback operations. The system is powered to support up to 128
combined IP and analog video streams, with up to 64 analog cameras
supported via the optional ENC5516 direct-attached encoder. Analog
streams are also supported using Pelco and third-party encoders.
The DSSRV2 NVR boasts total throughput of up to 350 Mbps
(300 Mbps for JBOD models) for recording analog and IP video
streams as well as playback and export through the DS ControlPoint
client. The increased data rate over original DSSRV models allows
more users to play back video from the server simultaneously. When
determining the maximum number of cameras and the desired frame
rate to host on each system, the number of concurrent client
connections, the number of streams played back per client, and the
bandwidth required for client connections must be considered.
The DSSRV2 NVR functions as a stand-alone system or as part of a
network of servers, monitored from the DS ControlPoint user
interface. The system can be deployed solely as a network video
recorder, as a digital video recorder (DVR), or as a hybrid NVR.
Two gigabit network ports provide for convenient network
architecture planning by allowing one port to be dedicated to
IP cameras, while the second network port is used for client
connections. Two DVI-D ports provide a convenient connection for
high resolution digital monitors for use with HD cameras.
Reliability
DSSRV2 models incorporate an SSD system drive. With increased
read-write speeds and no moving parts, the SSD system drive
increases the reliability, uptime, and responsiveness of the system.
DSSRV2 systems now support 4TB drives, increasing capacity by
33% over original DSSRV models without increasing cost. With
front-available storage drives for easy servicing and upgrades, the
DSSRV2 NVR is available with up to 20 TB storage for models
without the optional optical disk drive (ODD), or up to 16 TB for ODD
models. The drives are hot-swappable when configured for internal
RAID 5 storage.
External storage is supported through USB attached storage or by
using the optional DSSRV-SCSI interface card to connect to external
SCSI storage targets such as the DX8100HDDI, providing additional
storage of up to 24 TB. The external storage can be configured for
either JBOD storage or for software controlled RAID 5 storage.
Front panel LED displays on the DSSRV2 NVR provide information
on system operation. The LEDs are integrated with the new Digital
Sentry System Information (DSSI) utility, providing critical, real-time
statistics on system resource utilization, temperature, and
throughput status.
*The DS NVs database is limited to 128 cameras. The actual number of
cameras the server supports depends on camera settings, client activity,
network bandwidth, and the available throughput of the DSSRV2.