Operation Manual

C3674M-L (6/15) 11
Operation
SETUP
The Setup page (refer to Figure 2) contains the following options when you click the Setup icon located in the top-left corner of the
window or the Setup tab.
Application Settings: Allows you to select general settings for the application.
Manage Systems: Allows you to add, remove, and connect to the Digital Sentry and Pelco DX Series video recorders.
NOTE: The user logon and password for any video recorder using DS ControlPoint must be the same as the DS ControlPoint user logon and
password.
Create New Tour: Allows you to create automated tours of camera views.
Alarm Popup: Allows you to receive a pop-up notification when an alarm occurs on any connected system.
Digital Sentry Reports: Allows you to view several types of reports.
Check for Software Update: Allows you to check for DS ControlPoint software updates through the Internet.
About: Displays the DS ControlPoint version number and other version information.
Figure 2. Setup Page
LOCKING SHARED SETUP OPTIONS
To lock setup options:
1. Click the lock icon [icon to be inserted here] beneath the options tabs. The Lock Setup Password window appears.
2. Enter and confirm your password.
3. Click OK. The Setup Protection Enabled window appears.
4. Click OK.
5. Click the lock icon and enter your password to unlock the setup options.