Operation Manual

12 C3674M-L (6/15)
APPLICATION SETTINGS
When you click Application Settings in the Setup page, the Application Settings dialog box appears (refer to Figure 3). This dialog box allows you
to control your general, bandwidth, and synchronization settings for the application.
General: Allows you to save the last live configuration when the application is closed. You can also require a note when clearing an alarm,
enable an alarm pause timeout, select your native language, and select the time format to enter data and to view video.
Figure 3. General Settings Dialog Box
Bandwidth: Allows you to control the amount of information (data) requested from the DVR. When a server reaches the allowed bandwidth set
by the administrator, it blocks additional read attempts and moves them into a queue to be processed once bandwidth use reaches an acceptable
level.
If an administrator sets a bandwidth limit, a throttle override with dwell information can be set up. This will allow users to override the current
bandwidth restriction, if necessary, for a designated period of time. The following settings must be configured for the override:
• Bandwidth Limit: Using the slider, set the amount of information requested from the Digital Sentry server.
• Throttle Override: Select “Allow override...for” all systems or an individual system.
• Dwell Information: Set the override length of time (in seconds) for the bandwidth throttle override. Set the re-override length of time (in
seconds) a user must wait before attempting another override.
• Remote System Settings: This allows the administrator to limit the number of camera layouts or camera streams from DS ControlPoint.