Operation Manual
Table Of Contents
- Digital Sentry® DS ControlPoint
- Contents
- List of Illustrations
- Description
- Installing the Software
- DS ControlPoint Overview
- Operation
- Live
- Full Screen
- Quick Review
- Manual Record
- Snapshot
- Camera Groups
- Printing Images from Video Panes
- Entering a Motion Mask for Sarix Cameras
- Video Pane Borders
- Removing Video from a Window
- Manage OSD Settings
- Image Adjustments
- Enable On-Screen Pan/Tilt/Zoom
- Enable Digital Zoom
- PTZ Controls
- Alarm Page
- Pause Notification
- Search
- PTZ Cameras
- Appendixes
C3674M-L (6/15) 13
Figure 4. Bandwidth Settings Dialog Box
Once these options have been configured, you can open the ThrottleAssistant by typing “B” on the keyboard (refer to Figure 5). The settings
configured in the Bandwidth Settings dialog box appear in the ThrottleAssistant dialog box.
• If Individual was selected under Throttle Override, a list of connected systems will appear under “Available for Override.”
• If All Systems was selected under Throttle Override, All Systems will be the only item to appear under “Available for Override.”
The Countdown will begin with the override seconds and then will count down the refresh seconds.
Figure 5. Throttle Assistant
NOTE: You can only set a bandwidth throttle on connected systems. If you select All Systems and one or more of those systems are not
connected, you will receive a warning that the bandwidth throttle could not be overridden on the unconnected systems.
Sync: Allows you to synchronize your import and export settings, which makes it easy to share your configurations between two or more
systems running DS ControlPoint. You can import existing settings from DSAdmin to avoid recreating your system settings. You can also use
global settings when DS ControlPoint is first started, or you can clear your current settings and reload the global settings.