Operation Manual
Table Of Contents
- Digital Sentry® DS ControlPoint
- Contents
- List of Illustrations
- Description
- Installing the Software
- DS ControlPoint Overview
- Operation
- Live
- Full Screen
- Quick Review
- Manual Record
- Snapshot
- Camera Groups
- Printing Images from Video Panes
- Entering a Motion Mask for Sarix Cameras
- Video Pane Borders
- Removing Video from a Window
- Manage OSD Settings
- Image Adjustments
- Enable On-Screen Pan/Tilt/Zoom
- Enable Digital Zoom
- PTZ Controls
- Alarm Page
- Pause Notification
- Search
- PTZ Cameras
- Appendixes
18 C3674M-L (6/15)
SYSTEM LIST
The list of configured systems on the Connection Management page can be sorted by clicking any column title. The following columns are
included:
Connected: Indicates whether the system is connected (green), disconnected (red), or attempting connection (yellow).
Auto: Indicates that the system is configured for automatic connection when DS ControlPoint starts.
Name: Lists the name entered for the system during configuration.
IP Address: Lists the IP address or host name entered for the system during configuration.
Username: Lists the name entered for the user during configuration.
DVR: Indicates that the system was identified as a video recorder during configuration.
DP: Indicates that the system was identified as a DataPoint Server during configuration.
Favorite: Indicates that the system was identified as a favorite system during configuration.
Category: Lists the optional category entered for the system during configuration.
Progress: Indicated the status of system connections. A progress bar appears when you are connecting to a system.
To connect to a system, click the Connect icon (refer to Table A on page 18) or right-click the system name, and then select Connect from the list.
To edit the information about a system, click the Edit System icon or right-click the system name, and then select Edit System from the list.
To delete a system from the list, click the Delete System icon or right-click the system name, and then select Delete system from the list.
NOTE: The Edit System and Delete System functions are available only for systems that are not currently connected. Select Disconnect before
editing or deleting a system.
Table A. System Icons
Connect Connect to a system.
Add System Add a system to the list of available systems.
Update Password Update the password of the logged in user.
Edit System Edit the system settings (system name, IP address, and so on).
Delete System Remove the system from your System Management list.
User Override Override the saved user for each system with the new credentials provided.
Discover Systems Display a list of all systems on the network.
Recall List Show systems that have been connected to recently.
System Report Start a system report of selected systems.