Operation Manual
Table Of Contents
- Digital Sentry® DS ControlPoint
- Contents
- List of Illustrations
- Description
- Installing the Software
- DS ControlPoint Overview
- Operation
- Live
- Full Screen
- Quick Review
- Manual Record
- Snapshot
- Camera Groups
- Printing Images from Video Panes
- Entering a Motion Mask for Sarix Cameras
- Video Pane Borders
- Removing Video from a Window
- Manage OSD Settings
- Image Adjustments
- Enable On-Screen Pan/Tilt/Zoom
- Enable Digital Zoom
- PTZ Controls
- Alarm Page
- Pause Notification
- Search
- PTZ Cameras
- Appendixes
26 C3674M-L (6/15)
CONFIGURING THE ALARM PAGE SETTINGS
Alarm Popup allows you to receive a pop-up notification when an alarm occurs on any connected system. When Alarm Popup is enabled, the
alarm window moves to the foreground indicating that an alarm event has occurred on a connected system.
The Alarm Popup screen allows you to select the type of alarms you want to display, such as motion and zone. You can also select the location in
which you want the alarms to display, such as in an undocked window or in a new tab. Finally, you can configure each system individually for
alarm pop-ups and select the number of alarms to keep in the list. Click Return to Setup to return to the Setup page.
NOTICE: For Oncam Grandeye cameras, do not use the Alarm Popup feature. Running the Oncam Grandeye cameras with alarms may cause
resource issues resulting in ControlPoint unexpectedly stopping.
Figure 21. Alarm Popup Screen