Operation Manual
Table Of Contents
- Digital Sentry® DS ControlPoint
- Contents
- List of Illustrations
- Description
- Installing the Software
- DS ControlPoint Overview
- Operation
- Live
- Full Screen
- Quick Review
- Manual Record
- Snapshot
- Camera Groups
- Printing Images from Video Panes
- Entering a Motion Mask for Sarix Cameras
- Video Pane Borders
- Removing Video from a Window
- Manage OSD Settings
- Image Adjustments
- Enable On-Screen Pan/Tilt/Zoom
- Enable Digital Zoom
- PTZ Controls
- Alarm Page
- Pause Notification
- Search
- PTZ Cameras
- Appendixes
C3674M-L (6/15) 31
CONFIGURING ANALOG OUTPUTS
Analog outputs are visible in the Systems tree after connecting to a system in DS ControlPoint. Only analog cameras located on the same board
and capture card as the analog output can be viewed through the output.
Figure 28. Analog Output Screen
To configure analog outputs in DS ControlPoint:
1. Double-click an analog output in the Systems tree to open a new analog output tab titled Mon <#>, which will connect the system to a
specific monitor.
2. Drag and drop video in the video pane to automatically update the analog monitor.
3. Click one of the icons above the video pane to change layouts, remove video, or perform other actions.
NOTES:
• A system must have its analog outputs configured inside DSAdmin.
• Layouts are currently restricted to1x1,2x2,3x3,or4x4foranalog outputs modified through DS ControlPoint.
• Users without the appropriate permissions will not be able to view or modify analog outputs.