Operation Manual
Table Of Contents
- Digital Sentry® DS ControlPoint
- Contents
- List of Illustrations
- Description
- Installing the Software
- DS ControlPoint Overview
- Operation
- Live
- Full Screen
- Quick Review
- Manual Record
- Snapshot
- Camera Groups
- Printing Images from Video Panes
- Entering a Motion Mask for Sarix Cameras
- Video Pane Borders
- Removing Video from a Window
- Manage OSD Settings
- Image Adjustments
- Enable On-Screen Pan/Tilt/Zoom
- Enable Digital Zoom
- PTZ Controls
- Alarm Page
- Pause Notification
- Search
- PTZ Cameras
- Appendixes
38 C3674M-L (6/15)
Search
The Search tab allows you to search for recorded video on specific cameras.
Figure 33. Search Tab
What is displayed on the Search tab depends on the camera type: either a non-DS camera or a DS camera. If the video of a non-DS camera is
selected to be searched, the Search page will look similar to Figure 34.
LIVE AND PLAYBACK VIDEO SEARCH
NON-DS CAMERA SEARCH
Perform the following steps to search recorded video on a non-DS camera:
1. Click the Search icon to open the Modify Search tab.
2. Drag and drop cameras from the navigation pane into the video panes.
3. Enter the Start Time and End Time for the search, and then click the Next button.
WARNING: Video search requests may utilize large amounts of memory resulting in degraded and unpredictable system behavior. Pelco
recommends using a single search tab, and carefully selecting the smallest number of cameras and shortest timeline when using
ControlPoint.