Operation Manual
Table Of Contents
- Digital Sentry® DS ControlPoint
- Contents
- List of Illustrations
- Description
- Installing the Software
- DS ControlPoint Overview
- Operation
- Live
- Full Screen
- Quick Review
- Manual Record
- Snapshot
- Camera Groups
- Printing Images from Video Panes
- Entering a Motion Mask for Sarix Cameras
- Video Pane Borders
- Removing Video from a Window
- Manage OSD Settings
- Image Adjustments
- Enable On-Screen Pan/Tilt/Zoom
- Enable Digital Zoom
- PTZ Controls
- Alarm Page
- Pause Notification
- Search
- PTZ Cameras
- Appendixes
C3674M-L (6/15) 61
KBD5000 OPERATING FUNCTIONS
The KBD5000 keyboard performs best in live and playback modes.
Table F. KBD5000 Menu Operations (1 of 2)
Joystick Module
Key Description
Joystick: Used in conjunction with the Iris and Focus buttons.
Joystick trigger: Activates and exits PTZ mode.
Iris button: Changes the light settings.
In PTZ mode, press the Iris button, and then turn the joystick left or right to adjust the iris.
Focus button:
Adjust the focus: In PTZ mode, press the Focus button, and then turn the joystick left or right to adjust the focus.
Zoom In/Out: In PTZ mode, turn the joystick left or right without the Iris/Focus key illuminated.
Help button: Displays or hides the KBD5000 online Help.
Alphanumeric keypad: In PTZ mode, the entered number can be a pattern or preset. In navigation mode, the
entered number can be a camera, monitor, channel, time, or volume.
Camera selection button: Calls up the Select Camera dialog box with a list of cameras.
Multiple view buttons: Changes the currently selected video pane to one of the following screen layouts:1x1,
2x2,3x3,and4x4layouts. All other layouts must be configured with the mouse.
Jog/Shuttle Module
Key Description
Next/previous camera buttons:
Press the right or left menu buttons to cycle to the next or previous camera.
Shuttle (outer ring): Turn the shuttle to the left to rewind video at a variable speed. Turn the shuttle to the right to
forward video at a variable speed.
Jog (inner dial): Turn the Jog left to step the video back. Turn the Jog right to step the video forward.
Dyn1 and Dyn2: Configures and calls patterns.
1. Enter PTZ mode (Jsel).
2. Press a number, and then press Dyn1 (green).
3. Move the joystick to create the pattern.
4. Press the same number, and then press Dyn2 (red) to save and start the pattern.
When a pattern is saved, you can call it up by pressing a number, and then pressing Dyn2.
Dyn3 and Dyn4: Configures and calls patterns.
1. Enter PTZ mode (Jsel).
2. Navigate to your preset destination.
3. Press a number, and then press Dyn3 (green) to save the preset.
When a preset is saved, you can call it up by pressing a number, and then pressing Dyn4 (red).
Play/pause video button: Plays or pauses recorded video.
Press the Play/Pause button to play a recorded video. Press the Play/Pause button again to pause recorded video.