INSTALLATION/OPERATION KBD300USBKIT For use with DX4500/DX4600 DVRs and DS ControlPoint Software C2968M-A (10/09)
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 DX4500/DX4600 Series Digital Video Recorder. . . . . . . . .
List of Illustrations 1 2 3 4 5 6 7 8 4 DX4500/DX4600 Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 KBD300A Switch Settings: DX4500/DX4600 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Update Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Tables A B C D E F C2968M-A (10/09) RJ-45 Wall Block Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PV140 to RJ-45 Wall Block Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 DX4500/DX4600 Update Paths. . . . . . . . . . . . . . . . .
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Description The KBD300USBKIT is a required accessory if you want to interface the KBD300A keyboard to the DX4500/DX4600 Series digital video recorder (DVR). The KBD300USBKIT is also required to control certain functions of the Digital Sentry® (DS) ControlPoint software. This manual describes how to install and operate the KBD300A with the DX4500/DX4600 DVR and DS ControlPoint. DX4500/DX4600 SERIES DIGITAL VIDEO RECORDER The DX4500/DX4600 can be updated to support the optional KBD300A keyboard.
Installation DX4500/DX4600 SERIES DVR DX4500/DX4600 DVRs now support the use of the KBD300A keyboard. You must install the KBD300USBKIT to connect a KBD300A keyboard to a DX4500/DX4600. NOTES: • DX4500/DX4600 version 1.2 DVRs do not support Pelco C (Coaxitron) protocol, regardless of software version. • The unit’s firmware and application software must be updated to version 1.3 before connecting or using a KBD300A keyboard (refer to About Software Updates for the DX4500/DX4600 on page 9).
Keyboard Data and DIP Switch Cover: Contains the keyboard configuration switches. Use the switches to configure the keyboard address and operational mode (refer to Figure 2). 1 2 3 4 5 6 7 8 ON DOWN = ON Figure 2. KBD300A Switch Settings: DX4500/DX4600 Operation RJ-45 Connector: Connects the KBD300A to the terminal block using the RJ-45 cable. KBDKIT/KBDKIT-X: The keyboard wiring kit that provides power for the KBD300A keyboard and interfaces the keyboard to the PV140.
Table C. DX4500/DX4600 Update Paths Version DX4500/DX4600 Description Update Files 1.2 Version 1.2 hardware cannot be updated to support Pelco C (Coaxitron) protocol. Pelco D and Pelco P protocols must be used to operate PTZ cameras. • Version 1.3 kernel Units that were installed or shipped prior to the version 1.3 release are configured with version 1.2 firmware, kernel, and hardware. You must install the following updates: Refer to Updating the Firmware and Kernel. • Version 1.
5. From the System menu, click Update. The Update settings box appears (refer to Figure 3). Figure 3. Update Settings 6. Click the Update property. The Update settings box changes color. 7. On the front panel, press the SHIFT button, and then press the SET button. The Update dialog box appears. “MTD by default” appears in the image text box. 8. Click ALL AVAILABLE, and then click OK (refer to Figure 4).
9. Click OK. When the system locates the software update file on the USB drive, the system installs the application software. After the update process is complete, you are prompted to restart the DX4500/DX4600. Figure 5. Update Dialog Box 10. Click OK. The unit restarts and is ready for operation. 11. If necessary, repeat steps 1 through 10 to install more than one firmware update. NOTES: • Your unit might require more than one update to support the KBD300A.
WARNING: Do not connect the included PV140 power supply. The PV140 receives power from the computer and does not need a separate power supply. Computer: The computer on which DS ControlPoint is running. KBD300A Keyboard: Controls PTZ cameras connected to the computer. A 25-foot (7.6 m) RJ-45 cable is supplied with the keyboard. The RJ-45 connects the terminal block to the KBD300A keyboard. Keyboard Data and DIP Switch Cover: Contains the keyboard configuration switches.
INSTALLING THE KBD300A To install the KBD300A keyboard: 1. Attach the KBDKIT power supply to the RJ-45 wall block, but do not connect the power supply to a power source. Refer to Figure 1 on page 8 and Table A on page 9 for information about setting up the RJ-45 wall block for a DX4500/DX4600. Refer to Figure 6 on page 12 and Table D on page 13 for more information about setting up the RJ-45 wall block for DS ControlPoint. NOTE: Do not connect the PV140 power supply.
Operation KEYBOARD OVERVIEW SHIFT F1 / LATCH F2 / OFF F3 / MOM ON — AUX — OFF SEQUENCE MON ACK PREV NEXT HOLD PATTERN 1 2 3 NEAR FAR 4 5 6 OPEN CLOSE 7 8 9 CAM 0 CLEAR PRESET MACRO PGM KBD300A MADE IN U.S.A. Figure 8. KBD300A Keyboard Overview LED display Shift Key LED (on/off indicator) Joystick SHIFT PRESET PREV (previous sequence) PATTERN NEXT (next sequence) NEAR/FAR and OPEN/CLOSE: The focus and iris control keys.
KEYBOARD FEATURES AND FUNCTIONS WITH DX4500/DX4600 The KBD300A provides the following features for use with the DX4500/DX4600 Series DVR. JOYSTICK When the SHIFT LED is off (not lit), you can perform the following camera operations: • Control the camera’s PTZ function. – Twist the joystick clockwise to zoom in and counterclockwise to zoom out. – Move the joystick to stop a pattern. • Move the cursor in the on-screen camera menu.
F1/LATCH, F2/OFF, F3/MOM, AND AUX ON/OFF When the SHIFT LED is off (not lit), press a number and the AUX ON key to control the auxiliary functions; press a number and the AUX OFF key to control the receiver auxiliaries. MULTIPLEXER DISPLAY When the SHIFT LED is on (glows), press one of the following keys to customize how video is displayed in the application window.
C2968M-A (10/09)
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
www.pelco.com Pelco, Inc.