User's Manual

C1696M-B (11/08) 25
USING SHORTCUT CONTROLS FOR PTZ OPERATIONS
PAN TO ZERO
To pan the camera back to its zero position:
1. Right-click the video pane to display the shortcut menu (refer to Figure 19).
2. Select Operations.
3. Select “Pan to Zero.” The camera is repositioned at its zero position, which is determined by the position of the camera at installation.
.
Figure 19. Pan to Zero
ROTATE THE CAMERA
To rotate the camera 180 degrees:
1. Right-click in the video pane to display the shortcut menu.
2. Select Operations.
3. Select Rotate 180 Degrees.