User's Manual

108 C626M-B (3/05)DX8000 PC Client Application
LINKING CAMERAS TO RECORD IN RESPONSE TO MOTION AND ALARM EVENTS
Multiple cameras can be configured to begin recording when an alarm is triggered or motion is detected.
Linking Cameras to Motion Events
To link multiple cameras to record in response to motion detection events:
1. Click .
2. Click .
3. Click the Event - Recording Link Settings tab.
4. Select the source camera that will be used to detect motion from the Motion Source Camera drop-down box.
5. Click the button of each camera you want to begin recording when motion is detected by the source camera.
6. Click Apply.
Figure 133. Linking Cameras to Motion Events



