Spec Sheet

Pelco by Schneider Electric
625 W. Alluvial, Fresno, California 93711 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone]
www.pelco.com www.pelco.com/community
TECHNICAL SPECIFICATIONS
MODELS
Your model number consists of your VideoXpert software distribution, the
base model (VXS), the total storage capacity, and country code, if you want
the unit shipped with a particular power cord. For example, an ultimate model
with 96 TB storage with a US power cord is modeled as U1-VXS-96-US.
SUPPLIED ACCESSORIES
USB drive Contains resource and recovery information
Rack Mount Kit Brackets, rails, and hardware
Power cord For applicable models, otherwise, order the
PWRCRD model supporting your region
OPTIONAL ACCESSORIES
VXS-HDD-6TB Replacement 6 TB hard drive and carrier for
VXS Models
PWRCRD-S-AR Standard power cord, Argentina
PWRCRD-S-AU Standard power cord, Australia
SYSTEM
Processor Intel Xeon E3-1276 v3
Memory 32 GB DDR3 ECC
Operating System Microsoft Windows Server 2012
SSD Storage (OS) 200 GB
Raid Level RAID 6
Effective Capacity
VXS-48 32.70 TB
VXS-72 54.50 TB
VXS-96 76.40 TB
Drive Interface SAS/SATA II
USB Ports
USB 2.0 2 front, 2 rear
USB 3.0 2 rear
NETWORK
Interface 2, 1 Gbps Ethernet RJ-45 ports (1000Base-T)
Recording Throughput 300 Streams/450 Mbps
Viewing Throughput 32 Streams/176 Mbps
FRONT PANEL INDICATORS
Unit Status Blue, red, off
Primary Network Green, off
Secondary Network Green, off
Hard Disk Status
OS Drive (SSD) Amber, off
RAID Drives (HDD) Blue, red, off
Power Status Green, off
Power Fail Status Red, off
POWER
Power Input 100 to 240 VAC, 50/60 Hz, autoranging
Power Supply Internal, redundant
Power Consumption* Operating Average
120 VAC
48 TB 308 W, 2.57 A, 1051 BTU/H
72 TB 361 W, 3.01 A, 1231 BTU/H
96 TB 414 W, 3.45 A, 1411 BTU/H
240 VAC
48 TB 302 W, 1.26 A, 1031 BTU/H
72 TB 354 W, 1.48 A, 1209 BTU/H
96 TB 406 W, 1.69 A, 1386 BTU/H
*Power budgets represent worst-case scenarios. Actual power
consumption may vary based on workload and environment, but a
power budget estimate is usually 20%-25% greater than actual
power measurements when using the Linpack HPL workload
application.
ENVIRONMENTAL
Operating Temperature 10° to 35°C (32° to 95°F) at unit air intake
Storage Temperature –40°to 60°C (–40° to 140°F)
Relative Humidity
Operating 20% to 95%, noncondensing
Non-Operating 5% to 95%, noncondensing
Operating Altitude –16 to 3,048 m (–50 to 10,000 ft)
Operating Vibration 0.25 G at 3 Hz to 200 Hz at a sweep rate of
0.5 octave/minute
Note: The temperature at the unit air intake, measured at the front of the
bezel, can be significantly higher than room temperature. Temperature is
affected by rack configuration, floor layout, air conditioning strategy, and
other issues. To prevent hard disk drive failure and unit damage, make sure
the temperature at the air intake of the unit is continuously within the
operating temperature range.
PHYSICAL
Construction Steel and plastic cabinet
Finish
Front Panel Dark gray with metallic silver end caps
Chassis Silver
Dimensions (without rails) 64.8 x 43.7 x 13.2 cm
(25" D x 17.2" W x 5.2" H)
Unit Weight 35.5 kg (78 lb)
Mounting (RU) 3 RU (rack rails and hardware supplied)
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• ICES-003
• UL/cUL Listed
•C-Tick
•CCC*
•KCC
*
At the time of this publication, certifications are pending. Consult the
factory or www.pelco.com for the current status of certifications.
Distribution Model
Storage (in
TB)
Country Code
(optional)
(Ultimate) U1
(Enterprise) E1
VXS
48
US = North America
EUK = Europe/United
Kingdom
72
96
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All other product names and
services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2017, Pelco, Inc. All rights reserved.