Spec Sheet

C630 / REVISED 10-00
International Standards
Organization Registered Firm;
ISO 9001 Quality System
PRODUCT SPECIFICATION
communication & power
EA2010 Video Amplifier
POST-EQUALIZING, VIDEO ONLY
Product Features
• Solid-State Circuitry
• 120 or 230 VAC Input (for Wall Transformer)
• For Post-Equalization Applications Only
• Desktop or Rack Mount
The EA2010 provides a low cost, highly effective means of
maintaining picture quality in runs of up to 3,000 feet (914 m) of
RG59/U coaxial cable (equally effective with other cable types).
Front panel controls provide for adjustable overall amplifier flat gain
of 1 to 8 dB, plus adjustable high frequency boost of 0 to 18 dB at
12 MHz, maintaining full video amplitude, contrast, and detail.
The EA2010 features all solid-state circuitry and is supplied with a
U.L. Listed wall transformer. Applications of the EA2010 should be
for post-equalization only (located near the monitoring equipment);
use as a pre-equalizer is discouraged.
The EA2010 is a desktop unit. Up to three units can be mounted in a
single 1.75-inch x 19-inch (4.44 cm x 48.26 cm) rack by using the
R300 rack mount kit, or two units can be mounted side-by-side in
one chassis using the DT200 dual desktop mount kit.
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
1.75
(4.45)
5.50
(13.97)
GAIN
EA2010 EQUALIZING AMPLIFIER
12 VAC
OUTPUT
8.80
(22.35)
LF BOOST
INPUT
HF BOOST
Sections10-Index.bookPage427Monday,February27,200612:53PM