Spec Sheet

Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: [phone] • FAX [phone]
International Tel: [phone] • FAX [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODELS
EA2010 Desktop post-equalizing video amplifier, 120
VAC operation
EA2010/220 Same as EA2010 except 230 VAC operation
ELECTRICAL
Input Voltage 120 VAC, 50/60 Hz or 230 VAC, 50 Hz
Power Requirements
for Transformer 1.5 VA (.125 amp) at 12 volts RMS ±15%,
50/60 Hz from a dedicated, isolated power
source
Inputs Single BNC, internally terminated in 75 ohms
Outputs Single BNC, source terminated
Gain Adjustable from 1 to +8 dB
Signal-to-Noise Ratio -74 dB
Frequency
Response Adjustable from flat (±1 dB) at 12 MHz, to
greater than 18 dB of boost at 12 MHz
Output
Dynamic Range Up to 2 Vp-p at 50% APL
Up to 1.5 Vp-p at 90% APL
Cable Lengths Maximum
Cable Type Effective Distance
RG59/U 3,000 ft (914.4 m)
RG6/U 4,500 ft (1371.6 m)
RG11/U 6,000 ft (1828.8 m)
RG15/U 8,000 ft (2438.4 m)
MECHANICAL
Recessed Screwdriver
Adjustments Gain, HF boost, LF boost
GENERAL
Construction
Cover Steel, black polyester powder coat
Chassis Steel, zinc plated
Panel Aluminum, black polyester powder coat with
white silk-screen
Environment 32° to 120°F (0° to 49°C)
0% to 90% relative humidity
Unit Weight 3 lb (1.35 kg)
Shipping Weight 4 lb (1.8 kg)
CERTIFICATIONS/RATINGS
• CE, Class B (EA2010/220)
• UL Listed (EA2010)
• FCC, Class B (EA2010)
• Meets NEMA Type 1 standards
OPTIONAL ACCESSORIES
DT200 Dual desktop mount kit; two units can be
mounted side-by-side in one desktop chassis.
R300 Rack mounting kit (1 RU) for up to three
modules. Blank filler panels provided for less
than three modules. (Factory racking available
for R300 rack kit only. Specify when ordering.)
Pelco and the Pelco logo are registered trademarks of Pelco.
Specifications subject to change without notice.
©Copyright 2000, Pelco. All rights reserved.
TYPICAL CONFIGURATION
Sections10-Index.bookPage428Monday,February27,200612:53PM