Spec Sheet
PRODUCT SPECIFICATION
camera solutions
C3986 / REVISED 7-11-16
International Standards
Organization Registered Firm;
ISO 9001 Quality System
EH16 Series Enclosure
COMPACT, INDOOR/OUTDOOR, IP-ENABLED
Product Features
• High Reliability Die-Cast Construction
• Temperature Range from –30° to 60°C (–22° to 140°F)
• Meets IP66 and NEMA Type 4X Standards
• IK10 Mechanical Impact Resistance
• Models Available with Factory-Installed, Low-Power Heater and
Blower with 24 VAC Camera Power Supply
• Power Over Ethernet (PoE) Models: -2P and -8P Models Provide PoE
to the Camera and Power to the Heater and Blower
• Advanced Optics for Megapixel Camera Support
• Cable Entry Glands and Mounting Holes on Bottom of Enclosure
• Designed for Indoor/Outdoor Applications
• Easy Access for Servicing and Installation
• Optional Sun Shroud
The EH16 Series is an indoor/outdoor, highly reliable camera
enclosure with a compact body designed for easy installation.
Constructed from die-cast aluminum, the EH16 Series enclosure is
designed to operate in a wide range of environments and to protect
electronic components in temperatures from –30° to 60°C (–22° to
140°F).
The EH16 Series enclosure is designed for use with analog and IP
cameras that have both fixed and variable focal length lenses (with
or without auto iris operation). The tethered, detachable lid provides
easy access to the innovative camera sled. Two adjustable glands
(PG9 and PG11) on the bottom of the enclosure allow for easy
installation of the power and video cables.
Factory-installed options include a heater and blower with 24 VAC
camera power supply and sun shroud. The enclosure can also be
ordered from the factory with 24 VAC or IEEE802.3at power over
ethernet enclosure input voltage, 802.3af-compatible camera
power, and appropriate heater and blower power.
The EH16 Series is ideal for small- to medium-size analog and
IP cameras and can be mounted to Pelco’s EM16 (feedthrough wall
mount), EM1450 (non-feedthrough wall mount), or any other Pelco
light to medium duty mount.
EH16 ENCLOSURE WITH OPTIONAL EM16 FEEDTHROUGH MOUNT