Spec Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODELS
MECHANICAL
Cable Entry Two PG13.5 compression glands on bottom;
0.47-inch (1.19 cm) maximum cable diameter
Cable Entry Holes 0.875-inch (2.22 cm) diameter; will accept
0.5-inch (1.27 cm) conduit fitting when
compression gland is removed
Camera Mounting Removable camera sled; can be inverted
Rear Latch Link-lock, No. 3, stainless steel; can be
secured with padlock (not supplied)
ELECTRICAL
Input Voltage 24 VAC, 120 VAC or 230 VAC, 50/60Hz.
Electrical Connection Connectors for power input, lens, camera, and
accessories (-1/-2/-3 models only).
(-1/-2/-3 models only) Heater/defroster activates on at 42° to 58°F
(6° to 14°C) and off at 72° to 88°F (22° to
31°C). Blower activates on at 77° to 93°F (25°
to 34°C) and off at 62° to 78°F (17° to 26°C).
GENERAL
Maximum Camera Accepts camera and lens combinations*
and Lens Size (including BNC connector) up to:
EH4718 17.00" L x 5.50" W x 4.25" H
(43.18 x 13.97 x 10.795 cm)
EH4718-1/-2/-3 13.00" L x 4.75" W x 4.25" H
(33.02 x 12.07 x 10.795 cm)
EH4722 21.00" L x 5.50" W x 4.25" H
(53.34 x 13.97 x 10.795 cm)
EH4722-1/-2/-3 17.00" L x 4.75" W x 4.25" H
(43.18 x 12.07 x 10.795 cm)
Viewing Window 0.25-inch (6.35 mm) thick Lexan
®
Viewing Window Area 3.50" H x 4.00" W (8.89 x 10.16 cm)
Construction Die-cast, extruded, and sheet aluminum
Finish Gray polyester powder coat
Environment Indoor/outdoor;
–10° to 120°F (–23° to 49°C)
Weight Unit Shipping
EH4718 7.25 lb (3.28 kg) 9 lb (4.07 kg)
EH4718-1/-2/-3 8.50 lb (3.85 kg) 10 lb (4.53 kg)
EH4722 8.50 lb (3.85 kg) 10 lb (4.53 kg)
EH4722-1/-2/-3 9.75 lb (4.42 kg) 12 lb (5.44 kg)
CERTIFICATIONS/RATINGS
• CE (EH4718-3 and EH4722-3)
• UL Listed (except 230 VAC models)
• C-Tick
• Meets NEMA Type 3R standards
OPTIONAL ACCESSORIES
Blower Kit BK47-1
†
120 VAC, 8 W
BK47-2
†
24 VAC, 8 W
BK47-3
†
230 VAC, 8 W
Heater Kit HK47-1
†
120 VAC, 60 W
HK47-2
†
24 VAC, 50 W
HK47-3
†
230 VAC, 55 W
Defroster WD47-1
†
Window defroster, 120 VAC, 15 W
WD47-2
†
Window defroster, 24 VAC, 15 W
WD47-3
†
Window defroster, 230 VAC, 15 W
Sun Shroud SS4718 Sun shroud for EH4718 Series
enclosures
SS4722 Sun shroud for EH4722 Series
enclosures
Other O/I-PCB Accessory interface board;
thermostatically controls heater,
blower, and defroster operation (one
per enclosure required)
O/I-LPP
†
Preset position lens wiring harness
O/I-OUTLET
†
120 VAC electrical convenience outlet
TI47 Thermal insulation
RECOMMENDED MOUNTS
Pedestal EM1009U, Medium duty pedestal mount;
EM1015U maximum load 40 lb (18.14 kg)
MM22 Medium duty pedestal mount;
maximum load 40 lb (18.14 kg)
PM2000/ Pedestal mounts; maximum load
PM2010
‡
125 lb (56.63 kg)
Wall EM1900U Medium duty wall mount; maximum
load 40 lb (18.14 kg)
EM22 Medium duty wall mount; maximum
load 40 lb (18.14 kg)
WM2000
‡
Universal wall mount; maximum load
75 lb (33.97 kg)
Pipe/Pole EM1109 Medium duty pedestal mount for pipe/
pole; maximum load 40 lb (18.14 kg)
EM2000, Medium duty mount for pipe/pole
EM2200 applications; maximum load
40 lb (18.14 kg)
Adapter AH1000 Manually adjustable pan/tilt head
RECOMMENDED PAN/TILT
PT570 Series Medium duty pan/tilt, 120 or 24 VAC; maximum load
40 lb (18.14 kg)
*Assumes lens is fully extended.
†
These accessories are factory wired with a plug-in connector for use with
the O/I-PCB. The O/I-PCB is included with all -1/-2/-3 models. You must
order one O/I-PCB if you are using a basic enclosure (EH4718 or EH4722)
with these optional accessories.
‡
Use with AH1000 adjustable head.
Model Number
Basic Enclosure 120 VAC 24 VAC 230 VAC Heater Defroster Blower Max. Power Consumption
EH4718
•
EH4718-1
•••
68 W
EH4718-2
•••
58 W
EH4718-3
•• •
63 W
EH4722
•
EH4722-1
•••
68 W
EH4722-2
•••
58 W
EH4722-3
•• •
63 W
Note: If the optional defroster is used, add 15 W to the maximum power
consumption.
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2011, Pelco, Inc. All rights reserved.