User's Manual

4 C1431SM-B (7/09)
Important Safety Instructions
Installation and servicing should be done only by qualified service personnel and conform to all local codes.
Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only an
d it must not be
installed where exposed to rain and moisture.
Only use replacement parts recommended by Pelco.
After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the
exposed parts have not been connected to line circuitry.
The installation method and materials should be capable of supporting
four times the weight of the enclosure, pan/tilt, camera and lens
combination.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
To reduce the risk of electrical shock, do not remove cover. No user serviceable parts
inside. Refer servicing to qualified service personel.