Spec Sheet

TECHNICAL SPECIFICATIONS
GENERAL
Construction 316L stainless steel
Finish Electropolish
Viewing Window 0.50-inch (12.7 mm) thick, soda-lime
tempered glass
Operating Temperature –76° to 140°F (–60° to 60°C)
Unit Weight 11.33 kg (34.7 lb)
Shipping Weight 18.14 kg (40.0 lb) approximate
Effective Projected Area
(EPA) 31.1 square inches
ELECTRICAL
Input Voltage 24 VAC or 100 to 240 VAC, 50/60 Hz
Input Voltage Range ±10%
Power Consumption Maximum 60 W (120 VA) per system
Heater and Defroster Microprocessor controlled
Electrical Connections 6-foot pigtail wire harness with connections
for power, network, alarm inputs, and
auxiliary outputs
Auxiliary Outputs 3 normally open (N.O.) or normally closed
(N.C.) relays, 32 VDC, 0.5 A; relay 3 is
allocated specifically for an external washer
(not supplied by Pelco)
Alarm Inputs 7
MECHANICAL
Cable Entry One 0.75-inch (1.91 cm) NPT threaded
opening; one explosionproof sealable fitting
supplied
CERTIFICATIONS/RATINGS
•FCC
• UL/cUL Listed
• UL/cUL Hazardous Locations Listed per NEC Division and Zone
requirement
Class I, Groups A, B, C, and D
Class II, Groups E, F, G, T5
Class I, Zone 1, AEx d IIC
• AEx tD 21 T105°C
• BR-Ex d IIC, T5, IP66
04/UL-BRAE-0027
• IECEx UL 11.0007X
• Ex d IIC T5 Gb
• Ex tb IIIC T105°C Db IP66
• DEMKO 04 ATEX 0413858X
0539 II 2 G Ex d IIC, T5 Gb
II 2 D Ex tb IIIC T105°C Db IP66
• Tamb –60°C to 60°C
• NEPSI-China, Ex d IIC, T5, Cert No. GYJ05584
•C-Tick
• S Mark for Argentina
• Cisco
®
Medianet (MSP) compatible
• ONVIF 1.02
• Meets NEMA Type 4X standards
Note: Please contact Pelco for information on the dimensions of the
flameproof joints.
11.5 (29.21)
10.5
(26.8)
13.1 (33.27)
5.13
(13.03)
4.91
(12.47)
3.354
(8.52)
4 PLCS. TYP.
10MM - 1.5MM X 14MM
ON A 4.75-INCH DIA. B.C.
EQUALLY SPACED
0.75 NPT
(1.91)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.