Data Sheet

PRODUCT SPECIFICATION
camera solutions
C4048 / New 12-13-17
International Standards
Organization Registered Firm;
ISO 9001 Quality System
EHS8000 Series Enclosure
RUGGED, OUTDOOR, STAINLESS STEEL
Product Features
• High Reliability 316L Stainless Steel Construction
• Temperature Range from -40° to 50°C (-40° to 122°F)
• Meets IP66/IP68 and Type 6P Standards
• IK10 Mechanical Resistance, Vandal Resistance
• All Models Include Heater and Blower
• 24 VAC, Power Over Ethernet (PoE), and 230 VAC models
• Advanced Optics for Megapixel Camera Support
• Cable Entry Glands At the Rear of the Enclosure
• Integrated Cradle on Bottom of the Enclosure For Mounting or Used
In Conjunction With Included Wall Mount
• Easy Access for Servicing and Installation
• Sun Shroud and EMS8000 mount included
Pelco's EHS8000 Series rugged outdoor enclosure is designed to
protect camera and lens components in adverse environmental
conditions. The stainless steel construction increases reliability and
reduces the cost of maintenance.
The EHS8000 Series enclosure is easily installed in the field and its
rugged construction and high-quality seals prevent impurities from
contaminating camera and lens components.
Constructed of corrosion-resistant 316L stainless steel to IK10 and
IP66 and IP68 ratings, the rugged EHS8000 Series features a
mounting cradle, sled and track assembly for camera mounting for
easy access to the camera and lens. Power, video, and lens control
cables are routed through environmentally sealed gland fittings on
the rear of the enclosure.
All EHS8000 Series enclosures come standard with heater and
blower. Power input options include 24 VAC, 230 VAC and Power over
Ethernet while providing 24 VAC, 12 VDC, or POE power to the camera
depending on the model.
A sun shroud shields the enclosure from direct sunlight and reduces
the internal temperature by approximately 6° to 10°C (10° to 15°F).
The sun shroud and a wall mount bracket come standard with every
unit.