Spec Sheet

TECHNICAL SPECIFICATIONS
ANALYTICS
Required Systems for Pelco Analytics
Pelco Interface WS5200 Advanced System Management
Software on an Endura 2.0 (or later) system
Open API The Pelco API can transmit behavior alarm
data to third-party applications, available at
pdn.pelco.com
GENERAL
Construction Die-cast, extruded and sheet aluminum;
stainless steel hardware
Finish Gray polyester powder coat
Operating Temperature –45° to 50°C (–50° to 122°F) for sustained
system operation or 60°C (140°F) absolute
maximum; within two hours after power-up,
the entire unit can de-ice and be operational
from a temperature of –25°C (–13°F)
Operating Environment Will remain operational in 145 kph (90 mph)
wind conditions;
withstands 209 kph (130 mph)
Weight With With
Pedestal Adapter
Wall Mount
Unit
Standard with IOP 9.0 kg (20 lb) 9.9 kg (22 lb)
With Wiper and IOP 9.5 kg (21 lb) 10.4 kg (23 lb)
With Wiper and IOC 10.0 kg (22 lb) 11.0 kg (24 lb)
Shipping
Standard with IOP 11.3 kg (25 lb) 12.6 kg (28 lb)
With Wiper and IOP 11.7 kg (26 lb) 13.1 kg (29 lb)
With Wiper and IOC 12.3 kg (27 lb) 13.6 kg (30 lb)
PRESSURIZED INTEGRATED OPTICS CARTRIDGE (IOC)
• Pressurized to 10 psig, Nominal (Sea Level, 21°C [70°F])
• Internal Sensor for Low Pressure Alarm
• Designed to IP67 Standards
• U.S. Patent D472,260
MECHANICAL
Variable Speed 0.1° to 100°
Preset Accuracy ±0.1°
Pan Movement 360° continuous pan rotation
Vertical Tilt Unobstructed +36° to –85°
Manual Pan/Tilt Speeds
Pan 0.1° to 40°/sec manual operation
Tilt 0.1° to 30°/sec manual operation
Preset Speeds
Pan 100°/sec
Tilt 30°/sec
ELECTRICAL
Input Voltage 24, 120, or 230 VAC, 50/60 Hz; switch
selectable for 120/230 VAC inputs
Input Voltage Range ±10%
Power Consumption Maximum 70 VA per system
Heater and Defroster Thermostatically controlled
Electrical Connections
24 VAC Screw terminals for power and open collector
auxiliary output. RJ-45 connector for data
120/230 VAC RJ-45, 2 power source connections made at
mount location with wire splices and 1 ground
wire splice; 2 wire splices for Aux 2 output
Aux 2 Open collector output with 2-second
activation; connected relay must require no
more than 32 VDC and 40 mA to energize
relay coil; wire length between Esprit and
relay must be less than 3 m (9.84 ft)
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Meets NEMA Type 4X and IP66 Standards
• ONVIF Profile S
•Cisco
®
Medianet Media Services Proxy 2.0 compatible
REPLACEMENT INTEGRATED OPTICS PACKAGE (IOP)
The following IOP model is a replacement component only; it is not
interchangeable.
ESIOP5230 Esprit HD 1080P resolution camera and lens
module, 30X replacement IOP module
REPLACEMENT PRESSURIZED INTEGRATED OPTICS
CARTRIDGE (IOC)
The following IOC models are replacement components only; they are not
interchangeable.
ESIOC5230 Esprit HD 1080P resolution camera and lens
module, 30X replacement pressurized IOC
module
OPTIONAL ACCESSORIES
ES-REPLBLADE-2 Package of 2 window wiper replacement
blades
ES-REPLBLADE-10 Package of 10 window wiper replacement
blades