Spec Sheet

TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
SOFTWARE FEATURES
256 presets
16 tours
±0.1° preset accuracy
Frame Scan (8 configurable scans)
Patterns (8 recordable patterns, 5 minutes each)
Multilingual Menus (English, Spanish, Portuguese, Italian, German,
French, Russian, Turkish, Arabic, Chinese, and Korean)
Password protection
32 Window Blanks, configurable in size, with 5 window blur options
Configurable park with actions
Proportional pan/tilt continually decreases pan/tilt speeds in proportion
to depth of zoom
Pelco analytics including nine user-configurable behaviors
Image Defog modes
VIDEO
Video Encoding H.264 High, Main, or Base profiles and
MJPEG
Video Streams Up to 2 simultaneous streams; the second
stream is variable based on the setup of the
primary stream
Frame Rate Up to 60, 50, 30, 25, 15, 12.5, 10, 8.333, 7.5,
6, 5, 3, 2.5, 2, 1 (depending on the coding,
resolution, and stream configuration)
Available Resolutions
NETWORK
Interface Ethernet (100Base-TX)
Auto MDI/MDI-X
Auto-Negotiate
Ethernet Cabling Type Cat5e or better
SFP Interface Supports SFP Transceivers
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),
UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6*,
SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL,
SMTP, FTP, and 802.1x (EAP), NTCIP 1205
Users
Unicast Up to 20 simultaneous users depending on
resolution settings (2 guaranteed streams)
Multicast Unlimited users H.264
Security Access Password protected, 802.1x, HTTPS
Software Interface Web browser view and setup
Pelco System Integration VideoXpert Enterprise and VideoXpert 2.0 or
later
Endura 2.0 (or later)
Digital Sentry 7.3 (or later)
Open API Pelco API or ONVIF Profile S, Profile G, and
Profile Q
Mobile Application Integrated to Pelco Mobile App
Video Motion Detection Simple motion detection and camera
sabotage
Local Storage Capture 1–5–10 second video clips on camera
sabotage, motion detection, or alarm input;
record video continuously in the case of
network outage with option to overwrite;
access video through FTP protocol and ONVIF
Profile G
SDXC Card Addressable up to 2TB
Specification ES6230
Sensor Type 1/2.8-inch Type Exmor CMOS Sensor
Optical Zoom 30X
Digital Zoom 12X
Maximum Resolution 1920 x 1080
Lens
f/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~
129.0 mm (tele)
Horizontal Angle of View 63.7°(wide) - 2.3° (tele)
Aspect Ratio 16:9
Light
Sensitivity
Color (33 ms) 0.03 lux
Color (250 ms) 0.008 lux
Mono (33 ms) 0.004 lux
Mono (250 ms) 0.001 lux
Note: Sensitivity in lux for 90% reflectance, f/1.6 (wide angle), 50 dB gain
at 30 IRE (30% of signal level) with Sensitivity Boost OFF;
4X improvement to sensitivity with Sensitivity Boost ON
Day/Night Capabilities Yes
Shutter Range 1/1 ~ 1/10,000 sec
Signal-to-Noise Ratio >50dB
IR Cut Filter Yes
Wide Dynamic Range 130 dB
Iris Control Auto iris with manual override
Backlight Compensation Yes
Automatic Gain Control Yes
Active Noise Filtering 3D Noise Filtering
Electronic Image
Stabilization (EIS)
Yes
IR Wavelength 850nm
Resolution
H.264 High Profile
(IP GOP structure)
MPx Width Height
Aspect
Ratio
Maximu
m
IPS
Recommended
Bit Rate (Mbps)
2.07 1920 1080 16:9 60 8.00
2.07 1920 1080 16:9 30 6.05
0.92 1280 720 16:9 30 3.00
0.36 800 448 16:9 30 2.00
0.23 640 352 16:9 30 1.80
1.23 1280 960 4:3 30 3.80
0.49 800 608 4:3 30 2.00
0.31 640 480 4:3 30 1.45
0.08 320 240 4:3 30 0.50