- pelco Security Camera User Manual

Pelco Manual C306M-K (4/05) 19

AZ/EL LINE

Az/El Line controls the vertical display position of the Azimuth/Elevation label. The label

may be displayed on lines 3 through 10. Line 3 is the third line from the top of the screen

and line 10 is located at the bottom of the screen. Line 10 is the default setting.

To program the vertical label position for Az/El:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside Other.

3. Press the Iris Open button to enter the Other menu.

4. Position the cursor (>) beside Az/El/Direction.

5. Press the Iris Open button to enter the Az/El/Direction menu.

6. Position the cursor (>) beside Az/El Line.

7. Press the Iris Open button. The cursor moves to the right.

8. Move the joystick up or down to view the available selections.

9. SELECT – Press the Iris Open button to make a selection.

CANCEL – Press the Iris Close button to cancel a selection.

Other Menu

Park Time 0

Pan/Scan Spd 7

Power Up Default

Pat length 6 min

Spd Profile 50 MPH wind

Exit

Az/El/Direction

Set Azimuth Zero

Az/El

Az/El Line

Direction

Direction Line

Disp Duration

Exit

MAIN MENU

<Other>

EXIT

NOTE:

Az/El display is not

available while you are

programming or running a

pattern.