Data Sheet

PRODUCT SPECIFICATION
transmission and power
C3934 / REVISED 9-6-13
International Standards
Organization Registered Firm;
ISO 9001 Quality System
FMCI-PG Series Media Converters
10/100/1000 MBPS ETHERNET ELECTRICAL TO OPTICAL, REQUIRING FSFP MODULE
Product Features
• Full-Duplex Transmission of 10/100/1000 Mbps Ethernet
– 10Base-T/100Base-TX/1000Base-TX Electrical Port
– 1000Base-FX Optical Port When Used with Suitable Small
Form-Factor Pluggable (FSFP) Modules
• Supports Autonegotiation and Automatic Medium Dependent
Interface/Medium Dependent Interface Crossover (MDI/MDI-X)
Operation for Full-Duplex or Half-Duplex Operation
• Supports Distances up to 120 km (74.5 mi) Using Interchangeable
FSFP Modules for Compatibility with a Wide Range of Optical Fibers,
Optical Connector Types, and Optical Transmission (Must Be Ordered
Separately)
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• Voltage Transient Protection on All Power and Signal Input/Output
Lines Provides Protection from Power Surges and Other Voltage
Transient Events
• LED Status Indicators for Monitoring All Critical and Normal
Operating Parameters
• Hot-Swappable Rack Modules
• Stand-Alone or Rack-Mountable Modular Design
• Compliant with IEEE 802.3 Standards
The FMCI-PG1 and FMCI-PG1M are single channel Ethernet media
converters; FMCI-PG2 is a dual channel Ethernet media converter.
These devices accept a 10/100/1000 Mbps Ethernet rate and convert
it to a 1000 Mbps optical Ethernet rate using either one or two
optical fibers depending upon the specific optical module used.
Interchangeable small form-factor pluggable (FSFP) transceivers
must be ordered separately.
The FMCI-PG Series is designed to operate in harsh industrial
environments without electrical or optical adjustments (plug and
play). The FMCI-PG1 and the FMCI-PG2 may be mounted in a rack
or directly onto a surface. The FMCI-PG1M may be wall-mounted
for applications where space is limited.
The FMCI-PG Series units are designed to operate in extreme
temperatures. Built-in indicator LEDs display operating status.
External power is required for the FMCI-PG Series units. The units
can be powered with the recommended FEXTPS fiber external power
supply.
The optical transmission of Ethernet-compatible IP camera
surveillance video makes the FMCI-PG Series ideal for
transportation, airport, and college campus applications.
FMCI-PG1 FMCI-PG1MFMCI-PG2