Data Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community
TECHNICAL SPECIFICATIONS
MODELS
FMCI-PG1M IP media converter, requires FSFP modules*,
1000 Mbps, single-channel, miniature size
FMCI-PG1 IP media converter, requires FSFP modules*,
1000 Mbps, single-channel, standard size
FMCI-PG2 IP media converter, requires FSFP modules*,
1000 Mbps, two-channel, standard size
ELECTRICAL
Power Input
Standard Size 8 to 15 VDC
Mini AC/DC 22 to 27 VAC or 8 to 24 VDC
Power Consumption 2 W
MTBF >100,000 hours
LED Indicators Optical link, data activity
DATA
Data Interface Ethernet
Data Rate 10/100/1000 Mbps, IEEE 802.3 compliant
Operating Mode Electrical port, full-duplex or half-duplex
Optical port, full-duplex
OPTICAL
Data Rate 1000 Mbps
Wavelength FSFP dependent*
Number of Fibers FSFP dependent*
MECHANICAL
Connectors
Optical FSFP dependent*
Power Terminal block
Electrical RJ-45
Number of Rack Slots 1 (FMCI-PG1 and PMCI-PG2 models only)
*Requires selection of interchangeable FSFP modules (must be ordered
separately) for specific fiber type, distance, and connector. Refer to FSFP
Series Transceivers specification sheet for model number and description
of FSFP modules. Multimode fiber must meet or exceed fiber standard
ITU-T G.651. Single-mode fiber must meet or exceed fiber standard
ITU-T G.652.
GENERAL
Dimensions
FMCI-PG1, FMCI-PG2 15.5 × 13.5 × 2.8 cm
(6.1" D × 5.3" W × 1.1" H)
FMCI-PG1M 8.4 × 6.4 × 2.8 cm
(3.3" D × 2.5" W × 1.1" H)
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Weight
Unit <0.45 kg (1.00 lb)
Shipping 0.90 kg (2.00 lb)
CERTIFICATIONS/RATINGS
• CE, Class E
• FCC, Part 15
• UL Listed
•C-Tick
• IEEE 802.3
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
RECOMMENDED ACCESSORIES
EURACK Rack-mount chassis for up to 14 fiber optic
modules, internal power supply, European
power cord
USRACK Rack-mount chassis for up to 14 fiber optic
modules, internal power supply, North
American power cord
FEXTPS Fiber external power supply with multiple
plug adaptors (North American, Australian,
United Kingdom, and European); 100 to
240 VAC, 50 to 60 Hz input, 9 VDC output
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All other product names and
services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2013, Pelco, Inc. All rights reserved.