Data Sheet

PRODUCT SPECIFICATION
transmission & power
C3921 / NEW 11-1-12
International Standards
Organization Registered Firm;
ISO 9001 Quality System
FSV10D1 Fiber Transmitter
SINGLE-CHANNEL DIGITALLY ENCODED VIDEO WITH BIDIRECTIONAL DATA
Product Features
• Designed for Use in Spectra
®
IV Domes
• 10-Bit Digitally Encoded Video for High-Quality Video Transmission
over a Single Fiber
• Bidirectional RS-422 Data Channel or Coaxitron
®
Communication
• Supports Pelco Coaxitron “Up-the-Coax” Control Signals for a
Distance up to 69 km (43 mi)
• Multimode Fiber Support for Distances up to 4 km (2.5 mi)
• Single-Mode Fiber Support for Distances up to 60 km (37 mi)
• Exceeds All Requirements for the RS-250C Medium-Haul
Transmission Specification
• Laser Diode for Transmission of Optical Signals
• Compatible with NTSC, PAL, and SECAM Video Standards
• Designed to Meet NEMA TS-1/TS-2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• LED Status Indicators for Monitoring All Critical Operating
Parameters
The FSV10D1 fiber transmitter is designed for quick and easy
installation into the back box of Spectra
®
IV domes. The FSV10D1
transmitter allows transmission of one unidirectional composite
video channel and one bidirectional RS-422 data channel over one
optical fiber. In addition, the “up-the-coax” technology allows
Coaxitron
®
pan/tilt/zoom (PTZ) control data to be transmitted the full
distance of the fiber. Available in multimode and single-mode
versions, the FSV10D1 transmitter is compatible with the FRV10D1
receiver.
The FSV10D1 transmitter allows the user to choose bidirectional
data or up-the-coax through use of a dip switch on the compatible
FRV10D1 receiver unit. The selection of RS-422 data communication
allows PTZ control of the Spectra IV dome. With Coaxitron control,
PTZ control signals are transmitted over video coaxial cable from the
controller to the FRV10D1 receiver. The receiver then transmits the
Coaxitron data onto the fiber to the FSV10D1 transmitter. The
Coaxitron data is transmitted from the controller to the Spectra IV
dome during the vertical blanking interval of the video signal.
The FSV10D1 transmitter includes a corresponding 13-inch fiber
cable for easier pre-wiring installation. The unit operates using
power supplied from the Spectra IV dome.