User's Manual

C1680M (1/06) 11
CONNECTIONS
Before mounting the FT8301A transmitter, note the following transmitter connections (refer to
Figure 3):
• Power connection
NOTES:
– A 12 VDC or 24 VAC power supply can be used to power the transmitter. A 12 VDC
power supply is provided. If a 24 VAC power supply is used, the power supply must be a
Listed Direct Plug-In Power Unit marked as Class 2 and rated as 24 VAC, 200 mA
(minimum output).
– In extreme temperature conditions, it is recommended that an industrial-rated outdoor
power supply such as the Pelco WCS1-4 power supply be used.
• Fiber connection
• Video input connection (UTP or BNC per channel)
NOTE: When connecting to the UTP connector, it is recommended that solid UTP wire rather
than stranded UTP wire be used. If stranded UTP wire is used, it is recommended that you tin
the stranded wire.