Data Sheet

PRODUCT SPECIFICATION
transmission & power
C3922 / NEW 10-5-12
International Standards
Organization Registered Firm;
ISO 9001 Quality System
FTV10D1/FRV10D1 Fiber Transmitter and Receiver
SINGLE-CHANNEL DIGITALLY ENCODED VIDEO WITH BIDIRECTIONAL DATA
Product Features
• 10-Bit Digitally Encoded Video for High-Quality Video Transmission
over a Single Fiber
• Bidirectional Data Channel that Supports RS-232, RS-422, RS-485
(2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron
®
Communication
• Supports Pelco Coaxitron “Up-the-Coax” Control Signals for a
Distance up to 48 km (30 mi)
• Multimode Fiber Support for Distances up to 3 km (2 mi)
• Single-Mode Fiber Support for Distances up to 69 km (43 mi)
• Exceeds All Requirements for RS-250C Short-Haul Transmission
• Laser Diode for Transmission of Optical Signals
• Compatible with NTSC, PAL, and SECAM Video Standards
• Designed to Meet NEMA TS-1/TS-2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• Stand-Alone and Rack-Mountable Modular Design
• LED Status Indicators for Monitoring All Critical Operating
Parameters
Available in multimode and single-mode versions, the
FTV10D1/FRV10D1 fiber transmitter and receiver allow
transmission of one unidirectional composite video channel and one
bidirectional data channel over one optical fiber. In addition, the
“up-the-coax” technology allows Coaxitron
®
pan/tilt/zoom (PTZ)
control data to be transmitted the full distance of the fiber (up to
48 km for single-mode fiber). When using single-mode fiber, the
FTV10D1 transmitter and the FRV10D1 receiver offer an optical
power budget of 23 dB.
The FTV10D1 transmitter and the FRV10D1 receiver are compatible
with each other and other fiber models. The FRV10D1 receiver is
also backward compatible with the FSV10D1 transmitter.
The FTV10D1/FRV10D1 plug-and-play design ensures ease of
installation by requiring no electrical or optical adjustments. Modular
in design, FTV10D1 and FRV10D1 units can be rack-mounted using
the EURACK/USRACK chassis, or stand-alone modules can be placed
on a desktop or mounted to a wall (wall mount kit not required).
For stand-alone and wall mount installations, external power is
required for the FTV10D1/FRV10D1 units. The units can be powered
with the recommended FEXTPS fiber external power supply.
FRV10D1S1ST