Spec Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODELS
VIDEO/ELECTRICAL
Number of Channels 8
Video Input (FTV80D2)/
Video Output (FRV80D2) 1.0 Vp-p, 75 ohms; NTSC, PAL, SECAM
Overload >1.5 Vp-p
Bandwidth 10 Hz to 6.5 MHz per channel
Differential Gain <2%
Differential Phase <0.7°
Tilt <1%
Signal-to-Noise Ratio 67 dB at maximum optical loss budget
Max. Coaxial Cable (RG59) 100 m (300 ft) camera to fiber optic module
maintains 6 Mhz bandwidth
Power
Surface Mount 8 to 15 VDC at 4 W
Rack Mount Supplied by rack
MT
BF >100
,000 hours
LED Indicators Link, Video, Data
DATA
Number of Channels 2
Data Communication RS-232, RS-422, and RS-485 (2-wire/4-wire),
Manchester, and Bi-Phase
Maximum Baud Rate 250 Kbps
CONTACT CLOSURE
Number of Channels 1
Contact Interface 0.5 ms response time
In
put Dry
Output
SPST relay, 0.5 contact rating
MECHANICAL
Connectors
Optical ST or FC
Power Terminal block
Video BNC (gold-plated center pin)
Data Terminal block
Number of Rack Slots 3
GENERAL
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Dimensions 15.5 × 13.5 × 8.3 cm
(6.1" D × 5.3" W × 3.3" H)
Unit Weight 0.75 kg (1.65 lb)
Shipping Weight 0.90 kg (2.00 lb)
CERTIFICATIONS/RATINGS*
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
*At the time of this printing, all certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
RECOMMENDED ACCESSORIES
EURACK 4 RU rack accessory with European power
supply
USRACK 4 RU rack accessory with North American
power supply
FEXTPS Fiber External Power Supply with multiple
plug adaptors (North American, Australian,
United Kingdom, and European);
100 to 240 VAC, 50 to 60 Hz input,
9 VDC output
Transmitter
Compatible
Receiver
Fiber Optical
Connector Type
Number
of Fibers
Wavelength
Optical Power
Budget
Maximum
Transmission
Distance
Multimode (62.5/125 µm)
FTV80D2M1ST FRV80D2M1ST ST 1 1310/1550 nm 16 dB 2 km (1.2 mi)
Single Mode (9/125 µm)
FTV80D2S1ST FRV80D2S1ST ST 1 1310/1550 nm 23 dB 69 km (42.9 mi)
FTV80D2S1FC FRV80D2S1FC FC 1 1310/1550 nm 23 dB 69 km (42.9 mi)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss.
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.