DVR - Video Recorder User Manual
Table Of Contents
- DX4700/DX4800 Series Hybrid Video Recorder
- Contents
- List of Illustrations
- List of Tables
- Description
- Product Overview
- Operation
- Unit Startup
- Logging On and Logging Off
- Unit Shutdown
- About Basic System Defaults
- Quick Start to Working With the Unit
- Instant Recording and Playback
- PTZ in Live View
- Copying and Exporting Video
- Acknowledging an Alarm or Motion Event
- Displaying Video on the Main and Spot Monitors
- System Log List
- System Information
- Playback
- Search Video
- Formatting Media and Exporting Video
- Capturing a Video Scene
- Configuration
- Appendixes
- Appendix A: Overview of DX4700/DX4800 Setup Window and Operating Information
- Appendix B: Supported Media Devices
- Appendix C: Supported PTZ Protocols
- Appendix D: Supported IP Camera Resolutions
- Appendix E: Resolutions and Frame Rates (250 GB HDD)
- Appendix F: Troubleshooting
- Appendix G: Hardware and Software Upgrade Policy
- Appendix H: Recovering the Administrator Password
- Appendix I: Working with PTZ Devices Using the KBD300A Keyboard
- Appendix J: Factory Defaults
- Appendix K: Time Zone Conversion Chart
22 C4655M (2/11)
SYSTEM INFORMATION
The System Information option displays system and hard disk information. To view all system information, you must be logged on to the unit.
To view system information, click Information icon . The System Information screen displays all system information.
Figure 13. Viewing System Information: Full Details
Use the Pelco serial number when corresponding with Pelco about your unit. The MAC address is an internal number.
NOTE: If you do not log on to the unit, you can still view the unit's model name, serial number, and network IP address.
PLAYBACK
The unit supports two playback modes: playback and instant playback. The playback mode is accessed from the search window and is used by
the search feature to display video resulting from a search operation. The unit supports simultaneous playback and live recording. For information
about the instant playback mode, refer to Instant Playback on page 15.
The playback mode has the following conditions:
• Playback: Video is only displayed for the selected playback channels. For example, if channel 01 and 03 are selected for playback,
playback video is displayed in the top two panes. No video is displayed in the two bottom panes. If one channel is selected for playback,
video is displayed in a single pane.
• Selecting playback channels: One to all of the channels can be selected in the date/time and event search mode. One channel can be
selected in the bookmark search mode.
• Playback controls: All playback channels are controlled simultaneously. An operation performed on one channel is automatically
performed on all playback channels.
• Supported search modes: The playback mode is available for all search modes. The bookmark toolbar icon is unavailable if an external
backup device is selected.
• HVR operation: Recorded video can be viewed in the playback mode while simultaneously recording live video.