DVR - Video Recorder User Manual
Table Of Contents
- DX4700/DX4800 Series Hybrid Video Recorder
- Contents
- List of Illustrations
- List of Tables
- Description
- Product Overview
- Operation
- Unit Startup
- Logging On and Logging Off
- Unit Shutdown
- About Basic System Defaults
- Quick Start to Working With the Unit
- Instant Recording and Playback
- PTZ in Live View
- Copying and Exporting Video
- Acknowledging an Alarm or Motion Event
- Displaying Video on the Main and Spot Monitors
- System Log List
- System Information
- Playback
- Search Video
- Formatting Media and Exporting Video
- Capturing a Video Scene
- Configuration
- Appendixes
- Appendix A: Overview of DX4700/DX4800 Setup Window and Operating Information
- Appendix B: Supported Media Devices
- Appendix C: Supported PTZ Protocols
- Appendix D: Supported IP Camera Resolutions
- Appendix E: Resolutions and Frame Rates (250 GB HDD)
- Appendix F: Troubleshooting
- Appendix G: Hardware and Software Upgrade Policy
- Appendix H: Recovering the Administrator Password
- Appendix I: Working with PTZ Devices Using the KBD300A Keyboard
- Appendix J: Factory Defaults
- Appendix K: Time Zone Conversion Chart
34 C4655M (2/11)
CAMERA MENU
Figure 27. Camera Menu
The unit allows you to configure the following settings:
• Channel (Ch): Lists the input channels (CH 01 to CH 16, IP1, IP2).
• Name: Allows you to create a unique name for each camera (CH 01 to CH 16, IP 01, IP 02).
• Audio: Associates the audio input with the selected channel.
• Disable: Allows a camera to be enabled or disabled from displaying video.
To configure the camera settings:
1. From the Camera menu, click the Camera submenu.
2. Click the Channel box, and select the desired channel.
3. To enter a name:
a. Click the Name box. The on-screen keyboard appears.
b. Enter a name.
c. Click OK.
4. Click the Audio and Disable boxes to enter their settings.
5. Repeat the previous steps (as necessary) to configure additional channels.
6. Click Close.
7. Click OK.