DVR - Video Recorder User Manual

48 C4655M (2/11)
SEQUENCE
You can set the sequence dwell time for the main and spot monitor in increments of 2, 5, 10, 20, 30, 40, 50, 60, 70, 80, or 90 seconds.
To set the dwell time:
1. From the Display menu, click the Sequence submenu.
2. Click the Main Dwell Time box, and select the main monitor dwell time.
3. Click the Spot Dwell Time box, and select the spot monitor dwell time.
4. Click Close.
5. Click OK.
For information about setting the spot monitor event pop-up, refer to Linking Menu on page 49.
CHANNEL ASSIGNMENT
The unit allows you to assign the input channel to a specific application window pane.
The unit allows you to configure the following settings:
• Ch: Lists the input channels (CH 01 to CH 16) for configuration.
• Name: Allows you to increment through CH 01 to CH 16, IP 01, and IP 02.
To assign an input channel to a specific display channel:
1. From the Display menu, click the Channel Assignment submenu.
2. Click the Name box for a channel.
3. Right- or left-click the Name box to select an entry.
4. Repeat the previous steps (as necessary) to configure additional channels.
5. Click Close.
6. Click OK.
VIDEO ADJUSTMENT
The unit allows you to adjust the brightness, contrast, and color settings for each camera channel. The preview window provides an accurate
depiction of how the video scene will appear in the application window.
The unit allows you to configure the following settings:
• Channel: Selects the desired channel for adjustment.
• Brightness: Adjusts the brightness value from 0 to 100 for the selected channel.
• Contrast: Adjusts the contrast value from 0 to 100 for the selected channel.
• Color: Adjusts the color value from 0 to 100 for the selected channel.
• Restore to Default: Resets the selected channel settings to the factory defaults.
To configure the video display:
1. From the Display menu, click the Video Adjustment submenu.
2. Click the Channel box and select a channel.
3. Configure the remaining settings.
4. Repeat the previous steps (as necessary) to configure additional channels.
5. Click Close.
6. Click OK.