Spec sheet

TECHNICAL SPECIFICATIONS
BACK BOX FEATURES
CAMERA
Imager Type CMOS
Imager Readout Progressive scan
Electronic Shutter Range 1/5 ~ 1/30,000 sec (1 MPx),
1/5 ~ 1/25,000 sec (2 MPx)
Wide Dynamic Range 75 dB, 90 dB (Backlight Compensation On)
White Balance Range 2,000° to 10,000°K
Noise Reduction Yes (ON/OFF selectable)
Mechanical IR Cut Filter Yes (AUTO/MANUAL selectable), with different set points on lux
Signal to Noise Ratio
≥50 dB
LENS
Lens Type Built-in; fixed
Focal Length f/1.8, 2.8 mm
*Field of view may vary with changes in resolution settings.
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
Surface Mount
• RAL 9003
• Plastic body; polycarbonate bubble
12.59
(4.95)
5.57
(2.19)
2.93
(1.15)
Ø 12.60
(4.96)
Imaging Device MPx Sensor Maximum Resolution
2 MPx 1/2.8-inch 1920 x 1080 (2 MPx)
1 MPx 1/3-inch 1280 x 960 (1.2 MPx)
Minimum Illumination
MPx Sensitivity
Color Mono
33 ms 200 ms 33 ms 200 ms
2 MPx f/1.8 0.25 lux 0.02 lux 0.10 lux 0.01 lux
1 MPx f/1.8 0.05 lux 0.02 lux 0.10 lux 0.01 lux
Field of View* Lens
Angle of
View
1 MPx 2 MPx
2.8 mm
Diagonal 128° 132.8°
Horizontal 98° 115.1°
Vertical 73.5° 64°