Manualshelf

Installation Instructions

ManualsBrandsPelco ManualsNetwork20 Megapixel GFC Professional Multi Directional Environmental Dome Camera, 3.7-7.7 mm Lens
891011121314151617
12
13. On the outside of the cameras, the I/O wires connection should be protected against moisture by using electrical
insulation putty.
14. Install a Micro SD card if applicable.
15. When the Ethernet and I/O wires connection is complete, and the camera is powered up, try to find the camera using
Pelco’s VideoXpert.
16. DoubleClick on the camera’s entry on VMS to open a web console with the camera. A browser session will open. The
program will search for Pelco video receivers, video servers, or network cameras on the same LAN.
17. Use a ground wire (user supplied, with a resistance lower the 4Ω, a diameter larger than 20AWG) and an M4 screw
to connect it to the ground rod.