Manualshelf

Installation Instructions

ManualsBrandsPelco ManualsNetwork20 Megapixel GFC Professional Multi Directional Environmental Dome Camera, 3.7-7.7 mm Lens
891011121314151617
15
24. Replace the two desiccant bags on the sides of the camera. Desiccant is used to absorb moisture in the camera.
Replace the desiccant every time you open the dome cover. Note: Do not forget to install the new provided desiccant
bags. Otherwise, condensation might build in the lens. Secure the desiccant packs to the back housing to prevent
them from falling and obstructing the lens field of view.
25. Align the center of the dome cover (the center of the Pelco logo) with the alignment mark on the camera body. Aim
and then turn clockwise. Install the dome cover by fastening the T10 anti-tamper screws. You may need to carefully
route the safety tether aside. Complete the installation by tightening the T10 Screw on the side of the mounting plate
to 9 in-lbs (1.0 Nm). This will ensure the camera is secure in the mounting plate.